On HSFX 5.01 I have a problem with the sound:
I have an integrated Realtek High definition sound
The tiger fly by sound is sometimes lost (Mainly when a lot of activities, voices ,planes etc) then it comes back.
The outside sound of the ME 262 is almost no existent ( Extrimely low).
Finally I noticed that when there is an explosion on the objects on the ground, the flames desepear quickly , it is possible to have the flames stay like on the Plutonium Max effect I use on HSFX 4.11 ?
I relly would like to fix these two issues which could make the HSFX 5.01 very very well done.
TICI
There is a file fix for some sounds that were missed.
Uploading the file for you guys now. Link to follow.......
HSFX Sound Fix
S!
I installed the file and yes now the ME262 outside sound is there Thanks, but I still have the issue described for the flyby tiger which I lose on and off when to much is going on in the game, I wonder if anybody else has the same problem. I tested on 2 computers and the problem is on both, so I assume is an issue with the sound mod.
Hopefully there is a fix for this too.
Thanks,
TICI
TICI Wrote:I installed the file and yes now the ME262 outside sound is there Thanks, but I still have the issue described for the flyby tiger which I lose on and off when to much is going on in the game, I wonder if anybody else has the same problem. I tested on 2 computers and the problem is on both, so I assume is an issue with the sound mod.
Hopefully there is a fix for this too.
Thanks,
TICI
Did you remember to make the changes to your Conf.ini file for the HookFlyView?
Code:
[HookViewFly Config]
timeFirstStep=2.9
deltaZ=60.0
S!
yes I made that change in the conf.ini. I have HSFX 5.01 installed in two pc's and both have the same problem. In both Pc's I have Realtek High Definition Audio, I wonder if it has anything to do with this audio or there is some other change that it is needed .
Hopefully somebody out there has the same issue of losing the sound on and off in the tiger flyby.
TICI
I'm using Realtek Audio and have no problems.
Pls post a copy of your Conf.ini and I'll take a look for you.
S!
Can you please tell me how to attach my conf.ini in my reply?
TICI
Just copy and paste.
Please us the "Code" button above.
It would look something like this.........
Code:
Add conf.ini text here
S!
Code:
[il2]
title=Il2-Sturmovik Forgotten Battles
hotkeys=HotKey game
[window]
width=1280
height=1024
ColourBits=32
DepthBits=24
StencilBits=8
ChangeScreenRes=1
FullScreen=1
DrawIfNotFocused=0
EnableResize=0
EnableClose=1
SaveAspect=0
Use3Renders=0
[GLPROVIDER]
GL=Opengl32.dll
[GLPROVIDERS]
Open GL=Opengl32.dll
DirectX=dx8wrap.dll
[NET]
speed=5000
routeChannels=0
serverChannels=31
localPort=21000
remotePort=21000
SkinDownload=1
serverName=No Name
serverDescription=
remoteHost=
localHost=
socksHost=
checkServerTimeSpeed=1
checkClientTimeSpeed=0
[MaxLag]
farMaxLagTime=10.0
nearMaxLagTime=2.0
cheaterWarningDelay=5.0
cheaterWarningNum=-1
[chat]
region=(dx=0.6925,dy=0.071666665,x=0.0,y=0.0)
[game]
Arcade=0
HighGore=1
mapPadX=0.6875
mapPadY=-0.029166667
viewSet=43
Intro=0
NoSubTitles=0
NoChatter=0
NoHudLog=0
NoLensFlare=0
iconTypes=0
eventlog=eventlog.lst
eventlogkeep=0
3dgunners=1
[HotKey game]
PrintScreen=ScreenShot
P=pause
Pause=pause
[HotKey gui]
Escape=activate
[HookViewFly Config]
timeFirstStep=2.7
deltaZ=15.0
[HookView]
MouseLeft=Len
[HookView Config]
AzimutSpeed=0.1
TangageSpeed=0.1
LenSpeed=1.0
MinLen=1.0
DefaultLen=20.0
MaxLen=3000.0
Speed=6
[HotKey builder]
MouseLeft=objectMove
MouseRight=popupmenu
Enter=freeView
Shift MouseLeft=worldZoom
Alt MouseLeft=select+
Alt MouseRight=select-
Alt Ctrl=unselect
PageDown=change+
PageUp=change-
End=change++
Home=change--
Ctrl MouseLeft=insert+
Insert=insert+
NumPad-0=insert+
F=fill
Ctrl MouseRight=delete+
NumPad.=delete+
Delete=delete+
Backspace=cursor
Tab=cursor
F10=land
F11=onLand
NumPad-=normalLand
NumPad+=toLand
NumPad-5=resetAngles
NumPad-8=resetTangage90
NumPad-7=stepAzimut-5
NumPad-4=stepAzimut-15
NumPad-1=stepAzimut-30
NumPad-9=stepAzimut5
NumPad-6=stepAzimut15
NumPad-3=stepAzimut30
[MouseXYZ]
F1=SpeedSlow
F2=SpeedNormal
F3=SpeedFast
MouseRight=XYmove
F4 MouseRight=Zmove
MouseMiddle=Amove
F5 MouseRight=Amove
F6 MouseRight=Tmove
F7 MouseRight=Kmove
[MouseXYZ Config]
RealTime=1
[HotKey Console]
Shift Tab=Activate
[Console]
HISTORY=1024
HISTORYCMD=1024
LOAD=console.cmd
SAVE=console.cmd
LOG=0
LOGTIME=0
LOGFILE=log.lst
LOGKEEP=0
[sound]
SoundUse=1
SoundEngine=1
Speakers=2
Placement=0
SoundFlags.reversestereo=1
RadioFlags.Enabled=1
RadioEngine=2
MusicVolume=4
ObjectVolume=9
MusState.takeoff=0
MusState.inflight=0
MusState.crash=0
MusFlags.play=0
MasterVolume=9
Attenuation=7
SoundMode=1
SamplingRate=1
NumChannels=2
SoundExt.occlusions=0
SoundFlags.hardware=1
SoundFlags.streams=1
SoundFlags.duplex=1
SoundExt.acoustics=0
SoundExt.volumefx=0
SoundFlags.voicemgr=0
SoundFlags.static=1
VoiceVolume=11
Channels=2
SoundExt.extrender=0
SoundFlags.bugscorrect=0
SoundSetupId=8
ActivationLevel=0.02
Preemphasis=0.85
RadioLatency=0.5
AGC=1
PTTMode=1
SoundFlags.UseRadioChatter=0
SoundFlags.AutoActivation=0
RadioFlags.PTTMode=0
RadioFlags.PlayClicks=0
ActLevel=0
MicLevel=0
SoundFlags.forceEAX1=0
[rts]
;ProcessAffinityMask=1
mouseUse=2
joyUse=1
trackIRUse=1
DisableIME=0
locale=
JoyProfile=0
[rts_mouse]
SensitivityX=2.0
SensitivityY=2.0
Invert=0
SensitivityZ=1.0
[rts_joystick]
X=0 1 4 9 16 25 36 49 64 81 100 0
Y=0 1 4 9 16 25 36 49 64 81 100 0
Z=0 10 20 30 40 50 60 70 80 90 100
RZ=0 10 20 30 40 50 60 70 80 90 100 0
FF=0
U=0 10 20 30 40 50 60 70 80 90 100 0
V=0 10 20 30 40 50 60 70 80 90 100 0
1X=0 15 25 35 45 55 65 75 85 95 100 0 0
1Y=0 10 20 30 40 50 60 70 80 90 100 0 0
1RZ=0 0 10 19 32 43 54 63 74 86 100 0 0
1U=0 100 100 100 100 100 100 100 100 100 100 0 0
1V=0 100 100 100 100 100 100 100 100 100 100 0 0
[Render_DirectX]
TexQual=3
TexMipFilter=2
TexCompress=0
TexFlags.UseDither=1
TexFlags.UseAlpha=0
TexFlags.UseIndex=0
TexFlags.PolygonStipple=1
TexFlags.UseClampedSprites=0
TexFlags.DrawLandByTriangles=1
TexFlags.UseVertexArrays=1
TexFlags.DisableAPIExtensions=0
TexFlags.ARBMultitextureExt=1
TexFlags.TexEnvCombineExt=1
TexFlags.SecondaryColorExt=1
TexFlags.VertexArrayExt=1
TexFlags.ClipHintExt=0
TexFlags.UsePaletteExt=0
TexFlags.TexAnisotropicExt=0
TexFlags.TexCompressARBExt=1
TexFlags.TexEnvCombine4NV=0
TexFlags.TexEnvCombineDot3=0
TexFlags.DepthClampNV=0
TexFlags.SeparateSpecular=0
TexFlags.TextureShaderNV=0
HardwareShaders=0
Shadows=2
Specular=2
SpecularLight=2
DiffuseLight=2
DynamicalLights=1
MeshDetail=2
VisibilityDistance=3
Sky=2
Forest=2
LandShading=3
LandDetails=2
LandGeom=2
TexLarge=1
TexLandQual=3
TexLandLarge=1
VideoSetupId=15
ForceShaders1x=0
PolygonOffsetFactor=-0.15
PolygonOffsetUnits=-3.0
Water=1
Effects=1
[Render_OpenGL]
TexQual=3
TexMipFilter=2
TexCompress=2
TexFlags.UseDither=1
TexFlags.UseAlpha=0
TexFlags.UseIndex=0
TexFlags.PolygonStipple=1
TexFlags.UseClampedSprites=0
TexFlags.DrawLandByTriangles=1
TexFlags.UseVertexArrays=1
TexFlags.DisableAPIExtensions=0
TexFlags.ARBMultitextureExt=1
TexFlags.TexEnvCombineExt=1
TexFlags.SecondaryColorExt=1
TexFlags.VertexArrayExt=1
TexFlags.ClipHintExt=0
TexFlags.UsePaletteExt=0
TexFlags.TexAnisotropicExt=1
TexFlags.TexCompressARBExt=1
TexFlags.TexEnvCombine4NV=1
TexFlags.TexEnvCombineDot3=1
TexFlags.DepthClampNV=1
TexFlags.SeparateSpecular=1
TexFlags.TextureShaderNV=1
HardwareShaders=1
Shadows=2
Specular=2
SpecularLight=2
DiffuseLight=2
DynamicalLights=1
MeshDetail=2
VisibilityDistance=3
Sky=2
Forest=2
LandShading=3
LandDetails=2
LandGeom=2
TexLarge=1
TexLandQual=3
TexLandLarge=1
VideoSetupId=17
Water=1
Effects=1
ForceShaders1x=0
PolygonOffsetFactor=-0.15
PolygonOffsetUnits=-3.0
[QMB]
PlaneList=1
Hello,
HSFX 5.01 was working and it is great.
I added the suggested sound fix "fb_hfxsounds" and IL2 won't start.
I reinstalled HSFX 5.01, everything OK again.
I went to jsgme, removed the programs from the right side to the left side, added the "fb_hfxsounds" to root directory overwriting the previous one and no startup.
Reinstalled HSFX 5.01 to get everything OK again.
I believe to have followed the instructions.
Has anybody else experienced this phenomenon?
lucky_dude
You may have gotten a bad download.
S!
Charlie Chap of the 242nd Squadron has updated the HSFX Sounds file again.
Here is the latest D/L.
FB HFX Sounds.
S!
fb_hfxsounds.sfs from Charlie Chap worked for me
and the other one wouldn't.
I think we're OK now.
thank you
{HVY-E}Jinxx Wrote:Charlie Chap of the 242nd Squadron has updated the HSFX Sounds file again.
Here is the latest D/L.
FB HFX Sounds.
S!
Good day, everyone
I made this into a Sticky Topic, since we have come to a solution. [Added later: Be it not a complete solution.)
Fireskull