Another mistake at the FW 190 eliminated - Printable Version

+- All-Aircraft-Simulations (https://allaircraftsimulations.com)
+-- Forum: IL2 MODS Download & Discussion (https://allaircraftsimulations.com/forumdisplay.php?fid=267)
+--- Forum: IL-2 4.09m (https://allaircraftsimulations.com/forumdisplay.php?fid=348)
+---- Forum: IL2 MODS Discussion Section 4.09m (https://allaircraftsimulations.com/forumdisplay.php?fid=292)
+---- Thread: Another mistake at the FW 190 eliminated (/showthread.php?tid=51361)

---

Another mistake at the FW 190 eliminated - FW 190 A8 - 23.11.2007

Hello!

I was successful in elimianting another mistake at the FW 190. To be exactly the pilot tube at the

FW 190 A8
FW 190 A9
FW 190 F8
FW 190 A8 Mistel

At the original, the pilot tube is mounted on the tip of the right wing. In the simulation it's wrongly mounted on the tip of the left wing.

Fortunately the pilot tube is at the correct wing mounted at the FW 190 D9 and it's not a problem to change the Wing tips of the D9 with the wing tips of the above-named planes.

Can anyone tell me what's to do, that this mod can become published in the download section?

---

- Sturmbock - 23.11.2007

Good news!

Check this post:
(The link is inoperative)

---

- Brewster - 23.11.2007

So what about fuselage drop tank for my lovely FW 190D-9? Nearly all Doras in WWII were equiped with ETC 504 fuselage rack with drop tank...
Try to it, PLEASE! FW 190A-8!

---

- FW 190 A8 - 25.11.2007

Here's the manual:

1. Open the folder 3DO\Plane\Fw-190D-9(Beta)

2. Copy the following files from this folder :

Gloss1D0o.mat
Gloss1D0p.mat
Gloss1D0q.mat
Gloss2D2o.mat
Gloss2D2p.mat
skin1o.tga
skin1p.tga
skin1q.tga
WingLOut_D0.msh
WingROut_D0.msh

3. Paste these files into Your files folder into the following folders:

files\3DO\Plane\Fw-190A-8(Beta)
files\3DO\Plane\Fw-190A-9(Beta)
files\3DO\Plane\Fw-190F-8(Beta)
files\3DO\Plane\Fw-190F-8Mistel(Beta)

If You get the question to overwrite, klick "Yes to all".

4. Make the following entries into Your filelist:

3DO/Plane/Fw-190A-8(Beta)/Gloss1D0o.mat
3DO/Plane/Fw-190A-8(Beta)/Gloss1D0p.mat
3DO/Plane/Fw-190A-8(Beta)/Gloss1D0q.mat
3DO/Plane/Fw-190A-8(Beta)/Gloss2D2o.mat
3DO/Plane/Fw-190A-8(Beta)/Gloss2D2p.mat
3DO/Plane/Fw-190A-8(Beta)/skin1o.tga
3DO/Plane/Fw-190A-8(Beta)/skin1p.tga
3DO/Plane/Fw-190A-8(Beta)/skin1q.tga
3DO/Plane/Fw-190A-8(Beta)/WingLOut_D0.msh
3DO/Plane/Fw-190A-8(Beta)/WingROut_D0.msh

3DO/Plane/Fw-190A-9(Beta)/Gloss1D0o.mat
3DO/Plane/Fw-190A-9(Beta)/Gloss1D0p.mat
3DO/Plane/Fw-190A-9(Beta)/Gloss1D0q.mat
3DO/Plane/Fw-190A-9(Beta)/Gloss2D2o.mat
3DO/Plane/Fw-190A-9(Beta)/Gloss2D2p.mat
3DO/Plane/Fw-190A-9(Beta)/skin1o.tga
3DO/Plane/Fw-190A-9(Beta)/skin1p.tga
3DO/Plane/Fw-190A-9(Beta)/skin1q.tga
3DO/Plane/Fw-190A-9(Beta)/WingLOut_D0.msh
3DO/Plane/Fw-190A-9(Beta)/WingROut_D0.msh

3DO/Plane/Fw-190F-8(Beta)/Gloss1D0o.mat
3DO/Plane/Fw-190F-8(Beta)/Gloss1D0p.mat
3DO/Plane/Fw-190F-8(Beta)/Gloss1D0q.mat
3DO/Plane/Fw-190F-8(Beta)/Gloss2D2o.mat
3DO/Plane/Fw-190F-8(Beta)/Gloss2D2p.mat
3DO/Plane/Fw-190F-8(Beta)/skin1o.tga
3DO/Plane/Fw-190F-8(Beta)/skin1p.tga
3DO/Plane/Fw-190F-8(Beta)/skin1q.tga
3DO/Plane/Fw-190F-8(Beta)/WingLOut_D0.msh
3DO/Plane/Fw-190F-8(Beta)/WingROut_D0.msh

3DO/Plane/Fw-190F-8Mistel(Beta)/Gloss1D0o.mat
3DO/Plane/Fw-190F-8Mistel(Beta)/Gloss1D0p.mat
3DO/Plane/Fw-190F-8Mistel(Beta)/Gloss1D0q.mat
3DO/Plane/Fw-190F-8Mistel(Beta)/Gloss2D2o.mat
3DO/Plane/Fw-190F-8Mistel(Beta)/Gloss2D2p.mat
3DO/Plane/Fw-190F-8Mistel(Beta)/skin1o.tga
3DO/Plane/Fw-190F-8Mistel(Beta)/skin1p.tga
3DO/Plane/Fw-190F-8Mistel(Beta)/skin1q.tga
3DO/Plane/Fw-190F-8Mistel(Beta)/WingLOut_D0.msh
3DO/Plane/Fw-190F-8Mistel(Beta)/WingROut_D0.msh

5. Save the filelist

6. Start the simulation, choose one of these planes, look out of the cockpit and You will see the corrected position of the pilot tube.

That's all.

---

- Sturmbock - 25.11.2007

Good work!!!!



Only one question. When you change the interior canopy in A8, do you see a frozen sky?.

I got stuck with this. :?

---

- Jump_Pilot - 25.11.2007

It's PiTot tube. I'm not sure anyone should be changing parts around. Making AI flyable with cockpits, some sounds and dimming nav lights is one thing. Changing parts around is another IMO.

---

- Trooper117 - 25.11.2007

Not if it makes it more historicaly correct... Thats why we have this site, to mod things

---

Re: Another mistake at the FW 190 eliminated - fly_zo - 25.11.2007

FW 190 A8 Wrote:Hello!

I was successful in elimianting another mistake at the FW 190. To be exactly the pilot tube at the

FW 190 A8
FW 190 A9
FW 190 F8
FW 190 A8 Mistel

At the original, the pilot tube is mounted on the tip of the right wing. In the simulation it's wrongly mounted on the tip of the left wing.

Fortunately the pilot tube is at the correct wing mounted at the FW 190 D9 and it's not a problem to change the Wing tips of the D9 with the wing tips of the above-named planes.

Can anyone tell me what's to do, that this mod can become published in the download section?

if your mod is ready please mail it to MrJolly : peacelovinhippy@tiscali.co.uk

after his approval it will be posted as official mod at mods download section

thanks for your work

Z

---

- Jump_Pilot - 25.11.2007

Trooper117 Wrote:Not if it makes it more historicaly correct... Thats why we have this site, to mod things

where do you draw the line then?

---