All-Aircraft-Simulations
System Struggles on 'Perfect' - Printable Version

+- All-Aircraft-Simulations (https://allaircraftsimulations.com)
+-- Forum: Help Desk (https://allaircraftsimulations.com/forumdisplay.php?fid=270)
+--- Forum: IL2 Technical Help (https://allaircraftsimulations.com/forumdisplay.php?fid=304)
+--- Thread: System Struggles on 'Perfect' (/showthread.php?tid=56630)


System Struggles on 'Perfect' - HH_Cipher - 24.09.2008

HI Guys

Back on my old computer, it had a ATI 1300/1500 card with 256MB with memory and a lowzy rate. But could run OpenGL on perfect at about 30FPS and no problem.

Now with my new system, I have a Dual core processor at 2.66Ghz, 3GB of RAM at 700Mhz and a EN8800GT 512MB memory good shader rates etc. And I get 15 FPS on Perfect, I dont quite get that. Even on my Un-modded Il-2 it struggles. and I dont know why. Ive tried the new DDL's, and they dont do any thing. And my Nvidia card is Up to date Got any ideas?

- SVHAK - 24.09.2008

Hi

ok, you have a dual core, but are u using il2 on a single core??

that does magic :wink:

- HH_Cipher - 24.09.2008

SHVAK Wrote:Hi

ok, you have a dual core, but are u using il2 on a single core??

that does magic :wink:

How would I do that?

- GeneralPsycho - 24.09.2008

HH_Cipher Wrote:
SHVAK Wrote:Hi

ok, you have a dual core, but are u using il2 on a single core??

that does magic :wink:

How would I do that?

open your task manager, go into processes tab, then right click on the game exe name, set affinity to one of the cores

i have read this article, it helped me a lot, maybe it will hep you http://il2.netteq.com/guides/multicore/ ... html#Step1

- Decon - 24.09.2008

Do the Prioraff thing

Try the 177.92 drivers

Set Anti-aliasing to Multisampling 8X

Set Anisotropic to 8X

LOD to "Clamp"

Use Hi Quality Textures

VSYNC On

Force OpenGL Triple Buffering

Should be Good-to-Go

S~
D

- HH_Cipher - 30.09.2008

Decon Wrote:Do the Prioraff thing

Try the 177.92 drivers

Set Anti-aliasing to Multisampling 8X

Set Anisotropic to 8X

LOD to "Clamp"

Use Hi Quality Textures

VSYNC On

Force OpenGL Triple Buffering

Should be Good-to-Go

S~
D

I tried your settings. I got 29 FPS constant but it was still alot of studdering

- PA_Willy - 30.09.2008

Try with Vsync on BUT Triple Buffering disabled.

Check it.

Regards.

- stansdds - 01.10.2008

I run my 8800GT with vsync on and triple buffering off, it seems to help. Also try different game dll's. I think there is a pack of something like 5 versions on this site. I know I tried two or three before I got a good image and minimal stuttering. I don't think complete elimination of the stuttering is possible, it's been there for several years now and may be a problem with Nvidia's drivers as some drivers seem worse than others.

- HH_Cipher - 01.10.2008

stansdds Wrote:I run my 8800GT with vsync on and triple buffering off, it seems to help. Also try different game dll's. I think there is a pack of something like 5 versions on this site. I know I tried two or three before I got a good image and minimal stuttering. I don't think complete elimination of the stuttering is possible, it's been there for several years now and may be a problem with Nvidia's drivers as some drivers seem worse than others.

Ill have to take your point on that one. Il-2 is quite an old game. And its not really designed to take the new cards and chip sets. Possibly when ever the new patch comes out, If ever, It may have a fix in it I hope, Because alot of people have this trouble.

Thanks for the help guys. Ill keep fiddling and see where it goes.

- HH_Cipher - 01.10.2008

stansdds Wrote:I run my 8800GT with vsync on and triple buffering off, it seems to help.

Your settings gave me over 100FPS normally, but 19FPS on Perfect. So weird... Sad

- stansdds - 02.10.2008

Make sure "Extension limit" is turned off in the video card profile for Il2.

I average 58fps in the Black Death track, my monitor has a 60 Hz refresh rate (LCD).