All-Aircraft-Simulations
Shift+F1 - Printable Version

+- All-Aircraft-Simulations (https://allaircraftsimulations.com)
+-- Forum: IL2 MODS Download & Discussion (https://allaircraftsimulations.com/forumdisplay.php?fid=267)
+--- Forum: IL-2 4.09m (https://allaircraftsimulations.com/forumdisplay.php?fid=348)
+---- Forum: IL2 MODS Discussion Section 4.09m (https://allaircraftsimulations.com/forumdisplay.php?fid=292)
+---- Thread: Shift+F1 (/showthread.php?tid=57732)


Shift+F1 - Tom - 21.11.2008

Dear all,

all of a sudden my shift+F1 has stopped working regardless of what plane I'm in. I have 6DOF disabled and I have gone through the various aircraft making sure that any cockpit mods are turned off, but no joy!

Any suggestions?

Edit: Shift+F1 in a FW puts the "bar" in place, but that slides around depending on the angle of my TrackIR. I have disabled the bar mod too but no change.

Ehhh? - Guest - 22.11.2008

Ok this may be a real dumb question but ,have you gone into the control section to see if anything of your commands have changed?

Re: Ehhh? - Tom - 22.11.2008

Bingo1957 Wrote:Ok this may be a real dumb question but ,have you gone into the control section to see if anything of your commands have changed?

I have, but even with different keys mapped the problem remains.

I have also made sure that 6DOF is wholely removed and that it is not enabled in my TrackIR settings.

- Burning Beard - 23.11.2008

This may seem like a silly question, but have you checked your keyboard? Mine has a dual function "F" key mode on it. You may have punched this by accident.

Beard

- Tom - 23.11.2008

Burning Beard Wrote:This may seem like a silly question, but have you checked your keyboard? Mine has a dual function "F" key mode on it. You may have punched this by accident.

Beard

Single function keyboard - no function lock and I've used other keys. It's almost as if the reticules are locked like when the RAF reticules mod is used.

- USAFE - 25.11.2008

I have the same problem, Shift F1 no longer functions, Standard key board and even tried to change the settings in controls to use another key, all to no avail.

- USAFE - 28.11.2008

USAFE Wrote:I have the same problem, Shift F1 no longer functions, Standard key board and even tried to change the settings in controls to use another key, all to no avail.


:arrow: If you install the new Installer update, it resolves the issue with Shift F1. Many thanks, a lot of work has gone into this, congratulations.

- USAFE - 11.12.2008

You are correct, and installed, works great, and congratulations, you have done an outstanding job and thank you.