how do i get FULL graphics settings via conf.ini ? - Printable Version
+- All-Aircraft-Simulations (https://allaircraftsimulations.com)
+-- Forum: Help Desk (https://allaircraftsimulations.com/forumdisplay.php?fid=270)
+--- Forum: IL2 Technical Help (https://allaircraftsimulations.com/forumdisplay.php?fid=304)
+--- Thread: how do i get FULL graphics settings via conf.ini ? (/showthread.php?tid=62259)
+- All-Aircraft-Simulations (https://allaircraftsimulations.com)
+-- Forum: Help Desk (https://allaircraftsimulations.com/forumdisplay.php?fid=270)
+--- Forum: IL2 Technical Help (https://allaircraftsimulations.com/forumdisplay.php?fid=304)
+--- Thread: how do i get FULL graphics settings via conf.ini ? (/showthread.php?tid=62259)
Pages:
1
2
how do i get FULL graphics settings via conf.ini ? - Saburo Sakai - 04.06.2009
i was wondering if anyone has a high end PC and runs il2 on full spec.
could you possibly post your conf.ini settings.
i would like to know what the config would look like when maxing out the graphics
i have been playing around with my conf .ini and think i may have messed it up a bit.
i run with 8x anisotropic and anti-ailaising but can go as high as 16x and 16Q whatever that means . i also have many other goodies available to set on my card such as force mipmap, tripple buffering,conformant texture clamping/filtering, extension limits, and would love to get all this working to the max
i am fed up seeing objects rendered only when i get close to them.
- GeneralPsycho - 04.06.2009
I have nvidia 8800GTS 512 OC in SLI
my conf ini as follows
[Render_OpenGL]
TexQual=3
TexMipFilter=1
TexCompress=0
TexFlags.UseDither=1
TexFlags.UseAlpha=0
TexFlags.UseIndex=0
TexFlags.PolygonStipple=1
TexFlags.UseClampedSprites=1
TexFlags.DrawLandByTriangles=1
TexFlags.UseVertexArrays=1
TexFlags.DisableAPIExtensions=0
TexFlags.ARBMultitextureExt=1
TexFlags.TexEnvCombineExt=1
TexFlags.SecondaryColorExt=1
TexFlags.VertexArrayExt=1
TexFlags.ClipHintExt=0
TexFlags.UsePaletteExt=0
TexFlags.TexAnisotropicExt=1
TexFlags.TexCompressARBExt=0
TexFlags.TexEnvCombine4NV=1
TexFlags.TexEnvCombineDot3=1
TexFlags.DepthClampNV=1
TexFlags.SeparateSpecular=1
TexFlags.TextureShaderNV=1
HardwareShaders=1
Shadows=2
Specular=2
SpecularLight=2
DiffuseLight=2
DynamicalLights=1
MeshDetail=2
VisibilityDistance=3
Sky=2
Forest=3
LandShading=3
LandDetails=2
LandGeom=3
TexLarge=1
TexLandQual=3
TexLandLarge=1
VideoSetupId=17
Water=4
Effects=1
ForceShaders1x=0
PolygonOffsetFactor=-0.1875
PolygonOffsetUnits=-1.0
- Guest - 04.06.2009
I run two nvidia BFG 9800's and here are my settings
[il2]
title=Il2-Sturmovik Forgotten Battles
hotkeys=HotKey game
[window]
width=1920
height=1200
ColourBits=32
DepthBits=24
StencilBits=8
ChangeScreenRes=0
FullScreen=1
DrawIfNotFocused=0
EnableResize=1
EnableClose=1
SaveAspect=0
Use3Renders=0
[GLPROVIDER]
GL=Opengl32.dll
[GLPROVIDERS]
Open GL=Opengl32.dll
DirectX=dx8wrap.dll
[NET]
speed=5000
routeChannels=0
serverChannels=31
localPort=21000
remotePort=21000
SkinDownload=1
serverName=No Name
serverDescription=
remoteHost=
localHost=
socksHost=
checkServerTimeSpeed=1
checkClientTimeSpeed=0
[MaxLag]
farMaxLagTime=10.0
nearMaxLagTime=2.0
cheaterWarningDelay=5.0
cheaterWarningNum=-1
[chat]
region=(dx=0.6925,dy=0.071666665,x=0.0,y=0.0)
[game]
Arcade=0
HighGore=1
mapPadX=0.66875
mapPadY=-0.046666667
viewSet=32
Intro=1
NoSubTitles=1
NoChatter=0
NoHudLog=1
NoLensFlare=0
iconTypes=3
eventlog=eventlog.lst
eventlogkeep=0
3dgunners=0
ClearCache=0
clearcache=0
HakenAllowed=1
[HotKey game]
PrintScreen=ScreenShot
P=pause
Pause=pause
[HotKey gui]
Escape=activate
[HookViewFly Config]
timeFirstStep=2.0
deltaZ=10.0
[HookView]
MouseLeft=Len
[HookView Config]
AzimutSpeed=0.1
TangageSpeed=0.1
LenSpeed=1.0
MinLen=1.0
DefaultLen=20.0
MaxLen=3000.0
Speed=6
[HotKey builder]
MouseLeft=objectMove
MouseRight=popupmenu
Enter=freeView
Shift MouseLeft=worldZoom
Alt MouseLeft=select+
Alt MouseRight=select-
Alt Ctrl=unselect
PageDown=change+
PageUp=change-
End=change++
Home=change--
Ctrl MouseLeft=insert+
Insert=insert+
NumPad-0=insert+
F=fill
Ctrl MouseRight=delete+
NumPad.=delete+
Delete=delete+
Backspace=cursor
Tab=cursor
F10=land
F11=onLand
NumPad-=normalLand
NumPad+=toLand
NumPad-5=resetAngles
NumPad-8=resetTangage90
NumPad-7=stepAzimut-5
NumPad-4=stepAzimut-15
NumPad-1=stepAzimut-30
NumPad-9=stepAzimut5
NumPad-6=stepAzimut15
NumPad-3=stepAzimut30
[MouseXYZ]
F1=SpeedSlow
F2=SpeedNormal
F3=SpeedFast
MouseRight=XYmove
F4 MouseRight=Zmove
MouseMiddle=Amove
F5 MouseRight=Amove
F6 MouseRight=Tmove
F7 MouseRight=Kmove
[MouseXYZ Config]
RealTime=1
[HotKey Console]
Shift Tab=Activate
[Console]
HISTORY=1024
HISTORYCMD=1024
LOAD=console.cmd
SAVE=console.cmd
LOG=0
LOGTIME=0
LOGFILE=log.lst
LOGKEEP=0
[sound]
SoundUse=1
SoundEngine=1
Speakers=4
Placement=0
SoundFlags.reversestereo=0
RadioFlags.Enabled=1
RadioEngine=2
MusicVolume=8
ObjectVolume=14
MusState.takeoff=1
MusState.inflight=1
MusState.crash=1
MusFlags.play=1
MasterVolume=14
Attenuation=7
SoundMode=1
SamplingRate=2
NumChannels=3
SoundExt.occlusions=0
SoundFlags.hardware=0
SoundFlags.streams=1
SoundFlags.duplex=1
SoundExt.acoustics=0
SoundExt.volumefx=0
SoundFlags.voicemgr=0
SoundFlags.static=1
VoiceVolume=12
Channels=2
SoundExt.extrender=0
SoundFlags.bugscorrect=0
SoundSetupId=8
ActivationLevel=0.02
Preemphasis=0.85
RadioLatency=0.5
AGC=1
PTTMode=1
SoundFlags.UseRadioChatter=0
SoundFlags.AutoActivation=0
RadioFlags.PTTMode=0
RadioFlags.PlayClicks=0
ActLevel=0
MicLevel=0
SoundFlags.forceEAX1=0
[rts]
;ProcessAffinityMask=1
mouseUse=2
joyUse=1
trackIRUse=1
DisableIME=0
locale=
[rts_mouse]
SensitivityX=1.0
SensitivityY=1.0
Invert=0
[rts_joystick]
X=0 1 4 9 16 25 36 49 64 81 100 0
Y=0 1 4 9 16 25 36 49 64 81 100 0
Z=0 10 20 30 40 50 60 70 80 90 100
RZ=0 10 20 30 40 50 60 70 80 90 100 0
FF=0
U=0 10 20 30 40 50 60 70 80 90 100 0
V=0 10 20 30 40 50 60 70 80 90 100 0
[Render_DirectX]
TexQual=3
TexMipFilter=2
TexCompress=0
TexFlags.UseDither=1
TexFlags.UseAlpha=0
TexFlags.UseIndex=0
TexFlags.PolygonStipple=1
TexFlags.UseClampedSprites=0
TexFlags.DrawLandByTriangles=1
TexFlags.UseVertexArrays=1
TexFlags.DisableAPIExtensions=0
TexFlags.ARBMultitextureExt=1
TexFlags.TexEnvCombineExt=1
TexFlags.SecondaryColorExt=1
TexFlags.VertexArrayExt=1
TexFlags.ClipHintExt=0
TexFlags.UsePaletteExt=0
TexFlags.TexAnisotropicExt=0
TexFlags.TexCompressARBExt=1
TexFlags.TexEnvCombine4NV=0
TexFlags.TexEnvCombineDot3=0
TexFlags.DepthClampNV=0
TexFlags.SeparateSpecular=0
TexFlags.TextureShaderNV=0
HardwareShaders=0
Shadows=2
Specular=2
SpecularLight=2
DiffuseLight=2
DynamicalLights=1
MeshDetail=2
VisibilityDistance=3
Sky=2
Forest=2
LandShading=3
LandDetails=3
LandGeom=2
TexLarge=1
TexLandQual=3
TexLandLarge=1
VideoSetupId=4
ForceShaders1x=0
PolygonOffsetFactor=-0.15
PolygonOffsetUnits=-3.0
[Render_OpenGL]
TexQual=3
TexMipFilter=3
TexCompress=0
TexFlags.UseDither=1
TexFlags.UseAlpha=0
TexFlags.UseIndex=0
TexFlags.PolygonStipple=1
TexFlags.UseClampedSprites=0
TexFlags.DrawLandByTriangles=1
TexFlags.UseVertexArrays=1
TexFlags.DisableAPIExtensions=0
TexFlags.ARBMultitextureExt=1
TexFlags.TexEnvCombineExt=1
TexFlags.SecondaryColorExt=1
TexFlags.VertexArrayExt=1
TexFlags.ClipHintExt=0
TexFlags.UsePaletteExt=0
TexFlags.TexAnisotropicExt=1
TexFlags.TexCompressARBExt=1
TexFlags.TexEnvCombine4NV=1
TexFlags.TexEnvCombineDot3=1
TexFlags.DepthClampNV=1
TexFlags.SeparateSpecular=1
TexFlags.TextureShaderNV=1
HardwareShaders=1
Shadows=2
Specular=2
SpecularLight=2
DiffuseLight=2
DynamicalLights=1
MeshDetail=2
VisibilityDistance=3
Sky=2
Forest=2
LandShading=3
LandDetails=3
LandGeom=2
TexLarge=1
TexLandQual=3
TexLandLarge=1
VideoSetupId=17
Water=2
Effects=0
ForceShaders1x=0
PolygonOffsetFactor=-0.15
PolygonOffsetUnits=-3.0
[quick]
Custom0=NWEurope
Custom1=MTO
Custom2=Bessarabia
Custom3=Net5Summer
Custom4=Guadalcanal
Custom5=Sardinia
Custom6=Murmansk_Winter
Custom7=fly_Z_Britain_Autumn
Custom8=Midway
Custom9=Slot
Custom10=V1_Summer_1944
Custom11=zip_Alpen
Custom12=Mbug_Slovakia_winter
Custom13=dlv_Sinai
Custom14=BoB
Custom15=Burma
Custom16=Ardennes_W
Custom17=Channel
Custom18=Hawaii
Custom19=Kurland_Autumn_online
Custom20=Kuban
Custom21=Norway
Custom22=NewGuinea
Custom23=NWEurope
Custom24=OnlineITaly
Custom25=Singapore
Custom26=SandsOfTime
Custom27=Stalingrad_Winter
Custom28=vol_ItalyAfricaGreece
Custom29=Berlin
Custom30=Balaton
Custom31=Zuti_Slovenia_Off_S
Custom32=Zuti_Slovenia_Off_W
Custom33=Zuti_Slovenia_On_S
Custom34=Zuti_Slovenia_On_W
Custom35=Zuti_Slovenia_Summer
Custom36=Zuti_Slovenia_Winter
Custom37=Sakishima
Custom38=Korea
Custom39=Normandy2
With good results I think.
![[Image: example.jpg]](http://i697.photobucket.com/albums/vv340/Bingo1957/example.jpg)
- viking4570 - 04.06.2009
Shouldn't you have Forest=3 and LandGeom=3 for best results? -viking
- Guest - 05.06.2009
Yeah why not.Although the way are things going for me I'll settle for the good results most of the time over the best results part of the time or hardly ever.
- srk76 - 05.06.2009
BTW , can you tell me about last section [quick] - i don't have this
hock: ATI HD4670 512Mb
[Render_OpenGL]
TexQual=3
TexMipFilter=3
TexCompress=2
TexFlags.UseDither=1
TexFlags.UseAlpha=0
TexFlags.UseIndex=0
TexFlags.PolygonStipple=1
TexFlags.UseClampedSprites=0
TexFlags.DrawLandByTriangles=1
TexFlags.UseVertexArrays=1
TexFlags.DisableAPIExtensions=0
TexFlags.ARBMultitextureExt=1
TexFlags.TexEnvCombineExt=1
TexFlags.SecondaryColorExt=1
TexFlags.VertexArrayExt=1
TexFlags.ClipHintExt=0
TexFlags.UsePaletteExt=0
TexFlags.TexAnisotropicExt=1
TexFlags.TexCompressARBExt=1
TexFlags.TexEnvCombine4NV=0
TexFlags.TexEnvCombineDot3=0
TexFlags.DepthClampNV=0
TexFlags.SeparateSpecular=0
TexFlags.TextureShaderNV=0
HardwareShaders=1
Shadows=2
Specular=2
SpecularLight=2
DiffuseLight=2
DynamicalLights=1
MeshDetail=2
VisibilityDistance=3
Sky=2
Forest=2
LandShading=3
LandDetails=2
LandGeom=3
TexLarge=1
TexLandQual=3
TexLandLarge=1
VideoSetupId=17
Water=1
Effects=2
ForceShaders1x=0
PolygonOffsetFactor=-0.0625
PolygonOffsetUnits=-1.0
any sugestion ?
Re: how do i get FULL graphics settings via conf.ini ? - Guest - 05.06.2009
Saburo Sakai Wrote:i run with 8x anisotropic and anti-ailaising but can go as high as 16x and 16Q whatever that means .Actually, i'd also like to know what the 16Q means. I have it as an option in NVidia Control Panel, as well. btw, Saburo, most of the graphic changes can be upped in the GPU Control Panel (ATi/nVidia).
.
I've found that you can only do so much in the conf.ini - eg< i don't think you can set AA/AF, etc via the conf. Those need to be done in the Control Panel...
@ Bingo 1957 - that looks like a pretty decent setup you have - i must ask, though, why your Effects is set to 0? It can go up to 2, but is probably better on 1..... 8)
- Saburo Sakai - 05.06.2009
thanks lads, but i was looking for someone with maxed out graphics, from what i see, everyone bar generalPsyco has their water less than best, so it makes me wonder what other settings are not on max?
i will try you conf's and see if they run better than mine
i found out that 16Q is a VERY hi level of AA and that the line TexMipFilter=3 is the line that allows AA in il2.
but the thing is, for some reason, objects are rendered very late, and i cant work out why, it is like i am flying along and suddenly objects like buildings etc just appear infront of me, this is what i need to stop. i want to see them in the distance.
- kendo - 05.06.2009
Hi,
One thing you might try is to look at your page file settings.
I found that using a set size (ie not windows managed) for my page file equal to (or larger than) my available ram seemed to improve the rendering of landscape objects considerably.
Currently have 3.5 GB ram with page file set to same.
No guaranties, but worth a try.
- Saburo Sakai - 05.06.2009
page file..... hmmmm, any idea where i can set that?
- Guest - 05.06.2009
Here is the best that can be set in IL2, the rest does your video card:
Quote:[Render_OpenGL]
TexQual=3
TexMipFilter=3
TexCompress=0
TexFlags.UseDither=0
TexFlags.UseAlpha=0
TexFlags.UseIndex=0
TexFlags.PolygonStipple=0
TexFlags.UseClampedSprites=0
TexFlags.DrawLandByTriangles=0
TexFlags.UseVertexArrays=1
TexFlags.DisableAPIExtensions=0
TexFlags.ARBMultitextureExt=1
TexFlags.TexEnvCombineExt=1
TexFlags.SecondaryColorExt=1
TexFlags.VertexArrayExt=1
TexFlags.ClipHintExt=0
TexFlags.UsePaletteExt=0
TexFlags.TexAnisotropicExt=1
TexFlags.TexCompressARBExt=0
TexFlags.TexEnvCombine4NV=0
TexFlags.TexEnvCombineDot3=1
TexFlags.DepthClampNV=0
TexFlags.SeparateSpecular=1
TexFlags.TextureShaderNV=1
HardwareShaders=1
Shadows=2
Specular=2
SpecularLight=2
DiffuseLight=2
DynamicalLights=1
MeshDetail=2
VisibilityDistance=3
Sky=2
Forest=3
LandShading=3
LandDetails=2
LandGeom=3
TexLarge=1
TexLandQual=3
TexLandLarge=1
VideoSetupId=17
Water=4
Effects=2
ForceShaders3x=0
PolygonOffsetFactor=-0.15
PolygonOffsetUnits=-3.0
ForceShaders1x=0
- Saburo Sakai - 05.06.2009
thanks
i just set my card to the max 16qx aa and 16x as, super sampling etc etc etc, and upped my page file to 6000 mb, .... using psycho's conf and wow what a difference, card settings
anistropic filter -- 16x
AA gamma correction --on
AA setting --16xQ
AA transparency -- supersampling
force mipmaps --trilinier
text filtering neg load bias --clamp
texture filtering --high quality
tripple buffering --on
vertical sync -- on
i have some other settings burt i dont know what they will do so they are on default.
- kendo - 05.06.2009
Great - glad it worked.
Ken
- kendo - 05.06.2009
Hi again,
Just read your nVidia settings.
Don't know exactly what spec your PC is, although it sounds like you've got a powerful machine.
If everything is running fine then ignore what I'm about to say...
In my understanding if you are using anisotropic filtering then "force mipmaps" can be set to off / none.
"AA transparency - Supersampling" supposedly exacts a performance hit compared to "multisampling".
Likewise with "texture filtering" - running at "Quality" instead of "High Quality" allows you to use the useful "anisotropic sample optimisation" and "trilinear optimisation" settings which (on my machine at least) result in equally good image quality.
Once again - if your machine can handle it - great, - ignore everything I've said. If you find some issues with large numbers of aircraft / ground objects though, be aware that you can get a useful performance boost without sacrificing the eye candy.
Ken
- Saburo Sakai - 05.06.2009
thanks for the advice, i do not have a super computer , i am still on single core lol, but i do have a good card, lots of memory and patience , i will see how it goes and will adjust accordingly, but at the moment, i am loving the difference i have thanks to the guys that posted here.
still cant get the objects to render from a distance though
