(Map) TIB Archangelsk map V 1.0 - kapteeni - 25.09.2009
is finally here. Team International Brigades new and first map: Archangelsk.
Map fills a big cap of IL2 maps. namely Arctic areas. We sincerely hope that you guys like it. There is 4 versions included: default summer map with AAA UI 1.1 Stock textures and another summer version with mr. Agraciers beautifull set of original textures. Then you can find 2 winter versions. One with open and one with frozen water.
Mr Poltava is working hard to make a campaign for this beauty too and it can be download soon. Hopefully other mission makers will make some good missions and campaigns soon too.
Disclaimer:
We provide this map as it is. It has been tested with AAA UI 1.11 and it worked 100%. We can't promise that it will work with all possible combinations of beta maps and mods. And please, read the installation directions carefully before.
Here is the Installer version Download link 1 Megaupload:
http://www.megaupload.com/?d=30QDKKN5
And Mediafire:
http://www.mediafire.com/?f2zmhdzwuyj
You can find more info and some screenies here:
(The link is inoperative)
You can also install map manually:
Extract installer.exe to temporary folder and follow these Instructions:
This map uses AAA UI 1.1 Textures and objects. So You need to have AAA 1.1 Installed. It makes life easier. Only summer map with Agraciers textutes needs to be added
Place the folder 'ag_Archangelsk' in your maps folder in the following location:
...MODS/MapMods/Maps/
2/ The 2 winter maps use stock textures from other UI 1.1 installed maps. Check that you have M-bugs Slovakia winter map and textures installed and you need not occupy yourself with winter textures.
For the summer textures copy _Tex folder to the following folder:
MODS/MapMods/Maps/_Tex
If you have other ag maps installed you may already have certain of these textures in the same folder. If prompted you may either overwrite or ignore. It matters not since all textures with the same filenames are identical anyway.
3/ add the following lines to your all.ini
ag_Archangelsk ag_Archangelsk/load.ini
ag_Archangelsk_Summer ag_Archangelsk/load_s.ini
ag_Archangelsk_Winter2 ag_Archangelsk/load_w.ini
ag_Archangelsk_Summer_def ag_Archangelsk/load_sd.ini
Version with default textures only:
Here is a version that has been tested with Vanilla AAA UI 1.1!
I went back to AAA UI 1.1"out of the box" (lol) version and pasted my Archangelsk folder there. I didn't take any video's and screenshots, but i can guarantee 100 % that it will work With any Pc that has AAA UI 1.1 installed:
http://www.mediafire.com/?sharekey=5c3e ... d4883ce4dc
It has no new textures. But it's still beautifull!! M-bugs textures worked fine, because they comes with AAA UI so they are included too.
kapteeni/TIB
_________________
Here is a small personal note from Team member Mr. Agracier:
This Archangelsk map is for me something of a personal interest.
During WWII, my father, a 23 year old US Merchant Marine sailor, sailed to Archangelsk, on the west coast built Liberty Ship US Bellingham (operated by the Waterman Steamship Co. of Mobile Alabama), with the ill-fated convoy PQ17. The convoy left Iceland and took the northern route around Nord Kapp bound for Murmansk with a multitude of war material destined for the Soviet Armies, then still in retreat towards Stalingrad and the trans-Caucausus.
When Convoy PQ17 was on the open ocean, far to the north in the arctic Ocean, the British Admiralty called back all escorting naval vessels to counter what they thought to be a sortie by the German battleship Tirpitz. The sortie turned out to be a change of anchorage, but the convoy was left unprotected and subsequently attacked by German U-Boats and aircraft. The convoy scattered, with every ship for itself, the result being horrendous losses, ultimately some 50% of transports sunk.
The US Bellingham sailed far to the north, painting the superstructure with white paint where possible, and skirted Novaya Zemlya before heading for Archangelsk instead of the original destination of Murmansk. The ship was struck by a dud torpedo but suffered no loss of life nor serious damage and made it safely to Archangelsk port, where it lay up for the summer.
My father told many tales of what American food rations could all buy in Soviet Russia at the time and of the old ramshackle looking northern city replete with wooden houses and drinking establishments galore.
In September of 1942, with a double compliment of crew from other torpedoed ships, the US Bellingham sailed back to the UK to be sunk on the way by a torpedo somewhere in the North Sea. All crew and passengers were safely rescued by a British fishing boat and brought to Scotland some 2 weeks later, after learning a bit about North Sea fishing techniques.
So if I may permit myself a personal indulgence, I'd like to dedicate this map to my father US Merchant Marine ret.
agracier
Happy Flying!
Kapteeni/TIB
Comments and other feedback is welcome as always!
- kapteeni - 25.09.2009
Here is some screenshots from few simple missions that i made. I will upload them to missions and campaign threat ASAP:
- fly_zo - 25.09.2009
cool 8)
very useful map pack IMHO ...
many thanks to all involved
reg
Z
- Dudok22 - 25.09.2009
hock: good work!
- kapteeni - 25.09.2009
fly_zo Wrote:cool 8)
very useful map pack IMHO ...
many thanks to all involved
reg
Z
Thank you mate!!! With out you and other members of this forum this map would never been possible. For us Finns it is great to have maps of our wartime fronts too!
This map is for all those who enjoy long flying time. I once flew from Alakurtti to Murmansk and back and it took 3,4 hours. I listened Beatleses new 2009 remastered albums, my girlfriend was like :twisted: we were supposed to go for shopping ( me hates).
Textures that agracier makes for some other map (Maghellan AKA Tierra del Fuego IIRC) are fantastic, But this map is actually for cold dark winter. It must have been hellish thing to look around and all that you could see is forests and swamps...! And hills. Most of the losses happened because pilot's did get lost or didn't know where the sky ends (lol )because all was white, sky and landsacape.
Once again, Happy flying!!
Juha
- Lefty Hartnett - 25.09.2009
Thanks man----
Great work---
- karstele - 25.09.2009
Great contribution!
Thanks for all your hard work, not to mention the time you have given into this . . .
greetings karstele
- Lejo - 25.09.2009
- agracier - 25.09.2009
Just a tip for mission makers: there are 2 fully navigable river channels going up to the Archangelsk docks. It's a long and twisting route upriver, no doubt beset by German and Finnish pilots from time to time. But with skill and daring, Soviet pilots can no doubt keep those Lend-Lease Liberty ships arriving in good order ...
Good flying ... and many thanks to Kapteeni for getting this set up ...
- Ghost - 25.09.2009
Thank you for this map. It looks beautiful.
- kapteeni - 25.09.2009
agracier Wrote:Just a tip for mission makers: there are 2 fully navigable river channels going up to the Archangelsk docks. It's a long and twisting route upriver, no doubt beset by German and Finnish pilots from time to time. But with skill and daring, Soviet pilots can no doubt keep those Lend-Lease Liberty ships arriving in good order ...
Good flying ... and many thanks to Kapteeni for getting this set up ...
And put clouds as low as possible :twisted:
- Boosher - 25.09.2009
After installing this map I have a CTD at 70%. It ran fine beforehand. I had thought that 70% crashes were from the Static.ini, but there haven't been any changes there.
- Boosher - 25.09.2009
Yeah, that's what I thought. Everything looks fine, although my Texture folder is labeled "_Tex," not "Tex_." Think that has anything to do with it?
- EasyRider - 25.09.2009
It should be> _Tex
MODS/MapMods/Maps/_Tex
Easy
- fly_zo - 25.09.2009
yeah _Tex thing was my mistyping ( always confusing when typing form the head ..)
if all checks out then it isn't map that causing your trouble ...
did you do something with stationary aircraft mod ,ship mod , effects mod or any other which may be using/altering : technics.ini / ships.ini /stationary.ini ...
Z