Need info to use Carrier Takeoff 5.3.3 - Printable Version

+- All-Aircraft-Simulations (https://allaircraftsimulations.com)
+-- Forum: IL2 Modding Community (https://allaircraftsimulations.com/forumdisplay.php?fid=263)
+--- Forum: HSFX Forum. (https://allaircraftsimulations.com/forumdisplay.php?fid=317)
+--- Thread: Need info to use Carrier Takeoff 5.3.3 (/showthread.php?tid=67708)

---

Need info to use Carrier Takeoff 5.3.3 - Rockhoun - 05.01.2010

Hi all!

I have problem to understand how works the Carrier Takeoff mod.... I use UP 2.0 ,does i have to add some line in the config.in ... and how i do that cause for me the readme is not clear. Maybey im stupid, to old or need to be better in english !!!!!

thx for your help and sorry for your waiting time...

---

- skyomish - 05.01.2010

First you need to set a carrier that has CATAPULTS.
Set it as your home base and take off point.
Start your plane and pull up to the CATAPULT and set
your CHOCKS.
Set flaps , rev engine and release the chocks and your GONE.
In the JSGME make sure you have carrier take off ACTIVE.

---

- saipan - 06.01.2010

i think the essex has a cat doesnt it? move up to the front carfefully as u dont want to over shoot the cat. i use the shield on the right of the ship as a guidance. when the shield is directlly off your right wing stop and apply chocks. u may notice your plane move a little as it is aligned with the cat. throttle up and release chocks. u should be able to take off with full loads.

---

- Guest - 06.01.2010

1) Not all carriers have catapults. So catapult-mod won

---

- Rockhoun - 06.01.2010

Ok !

Thank you so much for your help, i appreciate that.

I`ll try it and works at the first run :lol: :roll: :wink: Big thanks gentlemen .

---