"Ox5ed0530e referenced memoryat "0x00051c"Mem - Printable Version

+- All-Aircraft-Simulations (https://allaircraftsimulations.com)
+-- Forum: IL2 MODS Download & Discussion (https://allaircraftsimulations.com/forumdisplay.php?fid=267)
+--- Forum: IL-2 4.09m (https://allaircraftsimulations.com/forumdisplay.php?fid=348)
+---- Forum: IL2 MODS Discussion Section 4.09m (https://allaircraftsimulations.com/forumdisplay.php?fid=292)
+---- Thread: "Ox5ed0530e referenced memoryat "0x00051c"Mem (/showthread.php?tid=67878)

---

"Ox5ed0530e referenced memoryat "0x00051c"Mem - Dietz - 13.01.2010

Ok this is on a fresh ( more or less HSFX4.1 install.
I was getting this message on virtually all WW2 & some Korea campaign US Navy carrier missions( ironically not on Japanese missions apparently...)no I didn't try all of them but about 5 or 6 last night, and they all stopped in 1-5 minutes .It didn't seem to matter whether the planes were on deck or not or if you could even see the carrier,I'd still get this message:



It dawned on me to look at the JSGME panel & turn off the "Carrier Take off Mod" found there- Problem solved...at least in the 2 or 3 Navy missions flown afterwards...so that's the good news.The bad news is it still persists at least in the new Berlin 1943 Night fighter campaign ( see above.) On the first mission which is really beautiful I get this during a radical slowdown of FPS's .There are many searchlights over the city & fires below but only2 German planes & maybe 12 Brit Halifaxes..not much flak:


So can anyone tell me what's the problem...have I run out of gas PC wise? This has hardly ever happened before ,but now seems to be a small problem with otherwise perfect download... :???: Stumped

---

- Thrud - 13.01.2010

This is a lack of RAM error. there were some other EXE's posted somewhere that may help with this. If you can't find them, i'll bring them by.

---

- Andris6000 - 13.01.2010

hey some thing like this shit happens to me when i press open canopy button on all the planes .

---

- Triad773 - 13.01.2010

I had that with HSFX 4. Now I am on UP 2.0. I tried that 1GB exe for 6dof that started those memory errors for me. I switched back to my original UP 2.0 il-2.exe and it went away. So did my 6dof, but I can always sort that out at my liesure.

Not sure if that's your issue, but it was mine.

---