Which lines in the static.ini are for Canon's BoB map trees? - Printable Version
+- All-Aircraft-Simulations (https://allaircraftsimulations.com)
+-- Forum: IL2 MAP MODS Download & Discussion (https://allaircraftsimulations.com/forumdisplay.php?fid=269)
+--- Forum: 4.09m (https://allaircraftsimulations.com/forumdisplay.php?fid=365)
+---- Forum: IL2 MAP MODS Discussion & WIP MAP 4.09m (https://allaircraftsimulations.com/forumdisplay.php?fid=335)
+---- Thread: Which lines in the static.ini are for Canon's BoB map trees? (/showthread.php?tid=68668)
+- All-Aircraft-Simulations (https://allaircraftsimulations.com)
+-- Forum: IL2 MAP MODS Download & Discussion (https://allaircraftsimulations.com/forumdisplay.php?fid=269)
+--- Forum: 4.09m (https://allaircraftsimulations.com/forumdisplay.php?fid=365)
+---- Forum: IL2 MAP MODS Discussion & WIP MAP 4.09m (https://allaircraftsimulations.com/forumdisplay.php?fid=335)
+---- Thread: Which lines in the static.ini are for Canon's BoB map trees? (/showthread.php?tid=68668)
Which lines in the static.ini are for Canon's BoB map trees? - the dutchman - 17.02.2010
I have it installed for the third! time now,and still NO TREES!
I just have to figure this out................ :evil:
- Jabo - 17.02.2010
It's in your conf.ini under [Render_OpenGL] nearer the bottom Forest=1.
This is mine:
[Render_OpenGL]
TexQual=3
TexMipFilter=3
TexCompress=2
TexFlags.UseDither=1
TexFlags.UseAlpha=0
TexFlags.UseIndex=0
TexFlags.PolygonStipple=1
TexFlags.UseClampedSprites=0
TexFlags.DrawLandByTriangles=1
TexFlags.UseVertexArrays=1
TexFlags.DisableAPIExtensions=0
TexFlags.ARBMultitextureExt=1
TexFlags.TexEnvCombineExt=1
TexFlags.SecondaryColorExt=1
TexFlags.VertexArrayExt=1
TexFlags.ClipHintExt=0
TexFlags.UsePaletteExt=0
TexFlags.TexAnisotropicExt=0
TexFlags.TexCompressARBExt=1
TexFlags.TexEnvCombine4NV=1
TexFlags.TexEnvCombineDot3=1
TexFlags.DepthClampNV=1
TexFlags.SeparateSpecular=1
TexFlags.TextureShaderNV=1
HardwareShaders=1
Shadows=2
Specular=2
SpecularLight=2
DiffuseLight=2
DynamicalLights=1
MeshDetail=2
VisibilityDistance=3
Sky=2
Forest=1
LandShading=3
LandDetails=2
LandGeom=2
TexLarge=1
TexLandQual=3
TexLandLarge=1
VideoSetupId=3
Water=4
Effects=2
ForceShaders1x=0
TypeClouds=1
PolygonOffsetFactor=-0.15
PolygonOffsetUnits=-3.0
VideoSetupId number depends on your graphics card. I have Nvidia 8800 GT.
- Murph - 17.02.2010
Jabo, I know you're trying to help, but he asked about the static.ini, not config.ini.
- the dutchman - 18.02.2010
Yes,sorry.......i do mean the static.ini,i assume that's where the trees are hiding somewhere.....and i got the advice on this forum i believe to set Forest=3?
- Lejo - 18.02.2010
Can't help you out with the static.ini but with forest=3 you will see these trees.
That's correct.
- the dutchman - 18.02.2010
I should......but i don't..........
- Jabo - 18.02.2010
Murph Wrote:Jabo, I know you're trying to help, but he asked about the static.ini, not config.ini.
I know your trying to help Murph, but no editting should is required of the static.ini to see trees. If your running in perfect mode and proper editing of conf.ini you should see trees.
- the dutchman - 18.02.2010
Stumbled over the solution by accident,checking my video options to be sure i'm running in perfect mode,i hit the apply button and behold...trees showed up,so for some reason although in perfect mode,i still have to click the apply button each time after starting up IL-2!
But what a difference those trees make,wow!
I only don't understand why Canon did the airfields terrain in low res,but hey you don't hear me complaining!
