Hsfx and Triplehead2 go digital - Printable Version

+- All-Aircraft-Simulations (https://allaircraftsimulations.com)
+-- Forum: IL2 Modding Community (https://allaircraftsimulations.com/forumdisplay.php?fid=263)
+--- Forum: HSFX Forum. (https://allaircraftsimulations.com/forumdisplay.php?fid=317)
+--- Thread: Hsfx and Triplehead2 go digital (/showthread.php?tid=70748)

---

Hsfx and Triplehead2 go digital - daftraider - 06.07.2010

Hi all
Been using Hsfx mod since it came out, and it's great.
So as I just turned the big 50, thought I treat myself to a few toys, I brought a triplehead 2 go digital unit, and 3x 24" screens.
I can set up il2 fb to run ok on the TH 2, but for some reason,having a issue with the mods version.
Matrox SGU has il2fb in it, and I have tried to point it to the HSFX version, But alas no luck, is there a fix in the Config I could add ?
Anyway thats the prob... many thanks in advance one and all.
Rich B (daftraider)

---

Re: Hsfx and Triplehead2 go digital - 8FS_Bulau - 11.07.2010

I don't know why stock would work, and HSFX not, but the only thing I know of in conf.ini is the line:

Use3Renders=

which you should set =1 for the 3 monitor setup, but are your 24" monitors widescreen, or regular 4:3 aspect ratio?

Then, I think you need to set up a 3:1 aspect ratio, where width is equal to 3x the horizontal resolution of a single monitor, and height is equal to 1x the vertical resolution of a single monitor. So, for example, if your monitors were 1920x1080, then you would set:

width=5760
height=1080

which is a heckuva lot of pixels to push. If your graphics card can't handle that, then you'll have to knock it down to something less, and stretch it to fill the screens.

---