more even before I put the folder MODS I tested and had not changed anything in the game, still the official
not know what to do for my mods and my sounds work
Posts: 884
Threads: 41
Joined: Feb 2009
If you have installed HSFX-V4.0 and HAFX-V 4.1 open your game folder and look for the
JSGME icon - it will be a BIG yellow "G" thing. Copy that to your desk top.
That will give you your MODS. just move them to the RIGHT . Hi-Lite the ones you want
then use the arrow key.
I tried this also
since the first time I tested this JSGME he never worked here and he's still conflict with other mods, eg if you try to use 00_A_Uranium_Edition_New_Effects_V1_Bomb_Bay_Door_Compatible_November_26_2009 joins the GUNFIRE him from error and disables the uranium! and none of them work even if I use only one of them does not work
The Uranium mod is not designed for HSFX. An UltraPack version (uses HSFX) should be available soon. Delete the MODS folder and enable only the historical mod in JSGME.
Posts: 884
Threads: 41
Joined: Feb 2009
The install goes like this.
CLEAN from disk 4.07m make sure NOTHING is left behind in Ubisoft folder.
Patch to 4.08m---Patch to 4.09m--Patch HSFX -V 4.0---Patch to HSFX-V4.1
NO OTHER MODS to start with.
Posts: 309
Threads: 81
Joined: Mar 2008
Didn't see any place to list bug/missing mods etc. so I posted it here. Please move this to the correct location if this is not the correct place.
The mirrors for the F6F-3 & F6F-5
Mirrors for the F6F-3 & F6F-5 are missing in 4.0 or 4.1 release.
Gun Sight Reticles in the 4.0 & 4.1 release
Cannot see the entire gun sight reticle in the reflector glass for the below listed stock aircraft regardless of the FOV selected and even if you keep your head rigid. The only way to see the entire 100 mil reticle is to select gun sight view, but this removes the x, y, and z axis from TrakIr 6DOF.
F6F-3, F6F-5, Corsair MkII, F4U-1A, F4U-1C, Corsair MKIV, F4U-1D, P-38J, P-38L, P-38L late.
stock 4.09 default skins
There should be an option to select stock 4.09 default skins. At least this way with marking turned on there won't be duplicate sets of markings appearing on the planes. Many servers, such as zekes vs wilcats, require default skins and correct markings. Too many one off or rare default skins rather than the most common used were chosen for certain stock aircraft in this release as well.
Advanced engine management
Advanced engine management when selected appears to ignore any joystick axis profile curves in hardware/input set up. I understand it increased the torque effects, but seems that you can no longer adjust for the joystick you happen to use.
bullet smoke trails
An option to turn off the bullet smoke trails for the machine guns would be nice in order to eliminate the Frame Rate hit they give.
UI 1.25
Any chance that UI 1.25 will be released separately to upgrade from UI 1.2 for those of us that preferred those mods and file structure rather than the HSFX version.
I understand I can change some of these things by adding them to the mods folder, but at least some should be addressed for ONLINE PLAY in order to remain CRT=2 compliant.
-)-MAILMAN-
thank you skyomish
sent you a pm
Posts: 884
Threads: 41
Joined: Feb 2009
Got it and you also have a PM ~S~
Are there also DL sides availeble for the 4.0 and 4.1 version with mediafire or something simulair? I have tried downloading with all the sites at page 5 from this thread for the last 3 hours or so, but i kepp getting error messgaes due to lots of Dowloaders atm and i stll haven't got 1 MB downloaded. besides that i doubt if you DL the whole thing at one due to download limits.
So please anyone?? upload it at mediafire pls.
S!
Posts: 884
Threads: 41
Joined: Feb 2009
-)-MAILMAN- Wrote:Didn't see any place to list bug/missing mods etc. so I posted it here. Please move this to the correct location if this is not the correct place.
The mirrors for the F6F-3 & F6F-5
Mirrors for the F6F-3 & F6F-5 are missing in 4.0 or 4.1 release.
Gun Sight Reticles in the 4.0 & 4.1 release
Cannot see the entire gun sight reticle in the reflector glass for the below listed stock aircraft regardless of the FOV selected and even if you keep your head rigid. The only way to see the entire 100 mil reticle is to select gun sight view, but this removes the x, y, and z axis from TrakIr 6DOF.
F6F-3, F6F-5, Corsair MkII, F4U-1A, F4U-1C, Corsair MKIV, F4U-1D, P-38J, P-38L, P-38L late.
stock 4.09 default skins
There should be an option to select stock 4.09 default skins. At least this way with marking turned on there won't be duplicate sets of markings appearing on the planes. Many servers, such as zekes vs wilcats, require default skins and correct markings. Too many one off or rare default skins rather than the most common used were chosen for certain stock aircraft in this release as well.
Advanced engine management
Advanced engine management when selected appears to ignore any joystick axis profile curves in hardware/input set up. I understand it increased the torque effects, but seems that you can no longer adjust for the joystick you happen to use.
bullet smoke trails
An option to turn off the bullet smoke trails for the machine guns would be nice in order to eliminate the Frame Rate hit they give.
UI 1.25
Any chance that UI 1.25 will be released separately to upgrade from UI 1.2 for those of us that preferred those mods and file structure rather than the HSFX version.
I understand I can change some of these things by adding them to the mods folder, but at least some should be addressed for ONLINE PLAY in order to remain CRT=2 compliant.
Have you been over to the 242 HSFX site ? They address some of these things there. Take a look.
hoot:---------------------------------4.08
Hi all, thanks to all the fathers of those fantastics mods. Anybody can tell me how to put more maps in QMB at HSFX 4.1?
I usually flight offline without time enought to make a full mission, so i like use the QMB with different types of situations. Thank you and sorry for my english.
My F6F cockpits + mirrors (Mr.Jolly ) HSFX 4.1 PATCH available here :
(The link is inoperative)
the way this mod intended to be ! .... God i hate when someone messes with my files without consulting me
reg
Z
Hi guys
I've been away a bit, and missed all this. What on earth is HSFX ??? [of any number]
Can any one point me to how it got started? And do I need it? [I have UI 1.1 installed]
yours, felix
