10.11.2008, 07:14
I'm from holland (The Netherlands)
WIP KI-44
10.11.2008, 10:30
I have to find out how much it would cost to send it to you. Then you could pay me the freight through paypal and it will be on the way. that's what I can offer. PM me if you have an other idea.
10.11.2008, 12:38
steeldelete Wrote:I have to find out how much it would cost to send it to you. Then you could pay me the freight through paypal and it will be on the way. that's what I can offer. PM me if you have an other idea.
i just cant pass up this opportunity to say how impressed i am with this
offer
steeldelete...you have my respect sir!
10.11.2008, 16:43
Salute,
before thinking about the sending I have to be sure it fits in my pc. is the gfxcard AGP or PCI Express,
only AGP fits in my pc.
Greetings,
Stefan Coert
before thinking about the sending I have to be sure it fits in my pc. is the gfxcard AGP or PCI Express,
only AGP fits in my pc.
Greetings,
Stefan Coert
11.11.2008, 12:57
Yes it is a AGP.
11.11.2008, 15:25
Salute,
Thats good news Have you figured out how much it would cost to send it to holland ?
Greetings,
Stefan Coert
Thats good news
Have you figured out how much it would cost to send it to holland ?Greetings,
Stefan Coert
12.11.2008, 12:09
Ok, here we go.
You can choose:
9 Euro and have to wait 3-4 days
or
6 Euro and have to wait 5-7 days
and I need your address.
You can choose:
9 Euro and have to wait 3-4 days
or
6 Euro and have to wait 5-7 days
and I need your address.
12.11.2008, 12:10
riffraffv8 Wrote:steeldelete Wrote:I have to find out how much it would cost to send it to you. Then you could pay me the freight through paypal and it will be on the way. that's what I can offer. PM me if you have an other idea.
i just cant pass up this opportunity to say how impressed i am with this
offer
steeldelete...you have my respect sir!
Thanks, it's just that I don't need it anymore. So if somebody could use it... (pssst... it is not so nice looking anymore, it is dusty too.) :roll:
12.11.2008, 12:32
.... do stay on topic guys ,
any further correspondence regarding steeldelete's generous offer please make via PM .
regards
Z
any further correspondence regarding steeldelete's generous offer please make via PM .
regards
Z
13.11.2008, 16:01
Salute,
rgr fly_zo. uhm its no problem that its dusty steel, as long as it works I am fine and for 9 bucks its worth it xD ill send you the adress via pm
Greetings,
Stefan Coert
rgr fly_zo. uhm its no problem that its dusty steel, as long as it works I am fine and for 9 bucks its worth it xD ill send you the adress via pm
Greetings,
Stefan Coert
18.11.2008, 09:35
Salute,
I want to inform everyone here that thanks to Steeldelete my pc is working again ( He send me a Graphics Card ) so in other words updates will be posted soon again 8)
Greetings,
Stefan Coert
I want to inform everyone here that thanks to Steeldelete my pc is working again ( He send me a Graphics Card ) so in other words updates will be posted soon again 8)
Greetings,
Stefan Coert
18.11.2008, 09:49
Salute, Steeldelete!
19.11.2008, 12:57
Salute,
Here is a quick wireframe render:
http://img240.imageshack.us/my.php?imag ... amerk7.jpg
As you can see it looks like there is a bend in the wing, there is but it isn't as bad as it looks. it are actualy some verteces that should be tweaked a bit but yea you could say that this image tricks your eyes when it comes to the wings. for the rest uhm I am going to merge the fin with the tail since right now they are 2 seperated objects wich I am finding a bit nasty so I most likely boolean it ( first make a copy of the fin ) and then put the fin at the right spot and weld it. The current polygon count is 7231.
Greetings,
Stefan Coert
Here is a quick wireframe render:
http://img240.imageshack.us/my.php?imag ... amerk7.jpg
As you can see it looks like there is a bend in the wing, there is but it isn't as bad as it looks. it are actualy some verteces that should be tweaked a bit but yea you could say that this image tricks your eyes when it comes to the wings. for the rest uhm I am going to merge the fin with the tail since right now they are 2 seperated objects wich I am finding a bit nasty so I most likely boolean it ( first make a copy of the fin ) and then put the fin at the right spot and weld it. The current polygon count is 7231.
Greetings,
Stefan Coert
20.11.2008, 07:11
Salute,
If you mean cutting the windows out as in: So you can see the interior then don't worry cause that will be all done with texturing. I am guessing you don't know this but in il2, lets say the ki-43, it isn't just 1 airplane its actualy like 46 copys of it like the level of detail ( LOD ), Damage Scale, Shadow Map uhm Caps etc etc so this wil be like the L0_D0 version of it ( The fully detailed one without damage ) once I finished this one then ill start working on the damaged airplane and the caps wich are like the fuselage and thing that stick out when u got a wing cut off. and for the polycount ... well lets say you have 4 Damage scales and they are all L0 then its like 7k polys x4 and then u have like LOD 2 wich are maby like 5000 polys. What I am trying to say Hunder is that in the end 1 airplane is actualy like 40 -+ airplanes and the polygon count will be like 50.000+. but now ill just try to make the L0_D0 look good and then ill think about the fuselage etc. Also this is the polygon count, as far as I know il2 engine doesn't support that ? and automaticly makes it traingles wich in this cause u can multiply the polygons by 2 and then you have the real number.
Greatings,
Stefan Coert
If you mean cutting the windows out as in: So you can see the interior then don't worry cause that will be all done with texturing. I am guessing you don't know this but in il2, lets say the ki-43, it isn't just 1 airplane its actualy like 46 copys of it like the level of detail ( LOD ), Damage Scale, Shadow Map uhm Caps etc etc so this wil be like the L0_D0 version of it ( The fully detailed one without damage ) once I finished this one then ill start working on the damaged airplane and the caps wich are like the fuselage and thing that stick out when u got a wing cut off. and for the polycount ... well lets say you have 4 Damage scales and they are all L0 then its like 7k polys x4 and then u have like LOD 2 wich are maby like 5000 polys. What I am trying to say Hunder is that in the end 1 airplane is actualy like 40 -+ airplanes and the polygon count will be like 50.000+. but now ill just try to make the L0_D0 look good and then ill think about the fuselage etc. Also this is the polygon count, as far as I know il2 engine doesn't support that ? and automaticly makes it traingles wich in this cause u can multiply the polygons by 2 and then you have the real number.
Greatings,
Stefan Coert
01.12.2008, 07:14
Salute,
Sorry for the delay :? here is a small update, not much but I did some vertex tweaking and worked on the tail, also added weapons and the wire above the airplane. haven't worked on hte airplane lately but I will post updates more often from now.
![[Image: ki44pic08hb7.th.jpg]](http://img390.imageshack.us/img390/5563/ki44pic08hb7.th.jpg)
Greetings,
Stefan Coert
Sorry for the delay :? here is a small update, not much but I did some vertex tweaking and worked on the tail, also added weapons and the wire above the airplane. haven't worked on hte airplane lately but I will post updates more often from now.
![[Image: ki44pic08hb7.th.jpg]](http://img390.imageshack.us/my.php?image=ki44pic08hb7.jpg)
Greetings,
Stefan Coert
« Next Oldest | Next Newest »
Users browsing this thread: 6 Guest(s)