[MOD] A6M Pack v1.501 *UPDATE*
#1

Hello,Everyone. I'm Japanese.
I can't speak English very will, I'm sorry.

I like "Zeek" very much.
But the shape makes a mistake in "Zeek" a little.
The shape of "A6M" was corrected. That's exhibited.

If a defect is found, please tell me.


Installation:
Please defrost the Tainan_A6M_Update folder under the MODS folder.

Uninstallation:
Please eliminate Tainan_A6M_Update folder.


Thank you very much. JapanCat

LINK INAVTIVE
LINK INAVTIVE

LINK INAVTIVE
LINK INAVTIVE

~HH_Cipher

-"A6M2" Type11.
-- Kruesi was eliminated.
-- A few defects were corrected.
-"A6M2-N" was added.(with 3D Damage model)
-- A defect was corrected.
-- The shape of the engine cowl, the body, all wings and the float was corrected.
It was the shape better than a wing of 21 type.
-- Attention!
A mapping of skin was corrected. Standard skin doesn't fit right.
The skin of default was changed. Please use skin of Mr. RZ or make it a base and make it.
I challenged. But a mistake is too big for skin of default already.
-- The shape of the canopy was changed. Mr. RZ did this correction.
- The shape of the headrest was changed.
and The shape of the canopy was changed.
Type 11, Type 21, Type 32. Attention. Please use new skin.
Special Thanks, Mr. RZ


-Wonderful skin of Mr. RZ was bundled.
http://flightsim.art.coocan.jp/index.htm
There is other wonderful skin in his HP.

=Special thanks=
-Model supervisor and inspection person.
Flare
Mimi(Ryu)
Glitter
-Technological adviser.
TAK
Wingzero
-Skin manufacturer.
RZ

A spout under the engine cowl was also added.
[Image: A6M2-N_Land.jpg]


TAINAN A6M Pack v1.422[/url]
TAINAN A6M MODS Skin Pack[/url]

-The shape of the headrest was changed.
--Type11, Type32, Type21
-"A6M3" Type32 was added.(with 3D Damage model)
--The correction contents are same as other models.
--The shape of the engine cowl is new.
--The shape of the wing is new.
--A lot was corrected small.
-"A6M2" Type11 was added.(with 3D Damage model)
--The correction contents are same as other models.
--The shape of the wing is new.
--A lot was corrected small.
--The shape of the exhaust was changed.
--A radio mast changed the length.


TAINAN A6M Pack v1.377
TAINAN A6M Pack v1.377 (Mirror)
-Bug Fix.
This is the defect which exists from the original.
The right gear cover doesn't close.
-The defect a wheel cover and a tank touch was corrected.
-The animation of a wheel cover was made right.
-A few overlayses were corrected.
-Details UP of Main gear.
-"A6M5b" Type52 Otu was added.(with 3D Damage model)
-"A6M5c" Type52 Hei was added.(with 3D Damage model)
-A cover of 13mm machine gun of "A6M5c" was added.
-The location of the weapon mounting equipment of "A6M5c" was corrected.
-"A6M7" Type62 and Type63 was added.(with 3D Damage model)

-"A6M2b" Type21 was added.(with 3D Damage model)
--The shape of the wing was made.
--The shape of the body was corrected.
--Several defects were corrected.
--The shape of the marking was corrected.
--A shadow model was added.
--The shape of the main gear and the location were corrected.

-The Rabaul version of 21 type was added.
--It's done automatically.
21 types (JA and JN) change into the Rabaul version
"A6M2b-21_Rabaul.bat" is executed.
21 types (JA and JN) change into the Standard version
"A6M2b-21_Standard.bat" is executed.
--When it's done manually.
Please eliminate A6M2-21(ja)\hier.him.
Copy A6M2-21(ja)\hier.him_Rabaul to A6M2-21(ja)\hier.him.
Change into the Rabaul version.

Please eliminate A6M2-21(ja)\hier.him.
Copy A6M2-21(ja)\hier.him_Standard to A6M2-21(ja)\hier.him.
change into the Standard version.

[Image: A6M2b-22_C.jpg]
[Image: a6m2-21-skin.jpg]

TAINAN A6M5 Pack v1.101
-A corrected damage model was added.
-The shape of the main gear was detailed.
-A main gear descent confirmation stick was added.
-A6M5 was added.
-20mm bullet wrap of A6M5, a cover was added.

TAINAN A6M5a v0.835
Attention.
Please eliminate a "A6M" folder of the old version.

-The shape of the body was detailed.
-The shape of the engine cowl was detailed.
-Outskirts of a propeller spinner were corrected.
-The shape of the 20mm gun was changed.
-The shape of the Pitot pipe was changed.
-A normal defect of an increased tank was corrected.
-The shape of the tail wheel was detailed.
-The size and the point of view of
the fuselage number of the vertical tail were corrected.

A6M5a v0.721
-The location of the gear was corrected.
-The length of the gear was made long.
-A texture of a wing was readjusted.

A6M5a v0.716
-The shape of the wing was corrected.
-The shape of the engine cowl was corrected.
-Readjustment of a texture of a wing
-The antenna wire was made thin.
-A propeller gear was added.
-The shape of the canopy was corrected.
-The shape of the level tail assembly was corrected.
-The shape of the engine intake was corrected.
-The location of the 20mm machine gun was corrected.
-A defect of a wing was corrected.
-A increase fuel tank was made.


v0.716

[Image: ZeroSideMuch.jpg]
[Image: ZeroTopMuch.jpg]
[Image: FrontBeforeB.jpg]
[Image: FrontAfter.jpg]
[Image: Wing_BefAft.jpg]
[Image: EngineInteak_BerAft.jpg]
[Image: Ballet_BefAft.jpg]
[Image: ETank_BefAft.jpg]

A defect was corrected.
[Image: BugBefore.jpg]
[Image: BugAfter.jpg]
[Image: Wing_thickness_A.jpg]

v0.721

The location of the gear has been corrected and the length has been also increased.
[Image: Gear_GefAft_B.jpg]

"HINOMARU" readjusted a texture of a wing and started to be indicated roundly.
[Image: Zero_Top.jpg]

But a problem is left.
52 type textures use something 21 types.

It's a little different in shape of the wing.
A flap is different-sized.
The size of the flap of 52 types of "IL2" and 21 types was same.

21 type textures didn't fit any more because the size of the flap was made right in version 0.716.

[Image: Remap_Void.jpg]

The idea that I thought was flashed.
The shape and the size were adjusted by not adopting the part of the texture.

I'm sorry, but a defect goes out by a certain texture.

v0.835

[Image: Body_Shape.jpg]
[Image: Engine1_Remake.jpg]
[Image: Prop.jpg]
[Image: 20mm.jpg]
[Image: Pito.jpg]
[Image: ETank_Fix.jpg]
[Image: GearC.jpg]
[Image: Keel_Marking.jpg]

v1.101

[Image: Damage.jpg]
[Image: Gearb.jpg]
[Image: A6M5_b.jpg]

v1.377

Bug Fix
[Image: RightGearBug.jpg]

Details UP
[Image: DetailsUp.jpg]
[Image: AnimatedGear.jpg]
[Image: Add_Plane.jpg]

A6M2b Type 21
[Image: A6M2b_WingA.jpg]
[Image: A6M2b_WingB.jpg]
[Image: A6M2b_WingC.jpg]
[Image: Body.jpg]
[Image: M2_Engine.jpg]
[Image: CockPit.jpg]
[Image: Formation_Light.jpg]
[Image: Marking_On.jpg]
[Image: Hook.jpg]
[Image: Shadow.jpg]

[Image: A6M2b-22_Rabaul_A.jpg]

v1.422

Type 11, Type 32, Type 21
[Image: HeadLest.jpg]

A6M3 Type 32
[Image: EngineCowl.jpg]
[Image: Type32Wing.jpg]

A6M2 Type 11
[Image: Exhaust.jpg]

A6M2-N
[Image: Bug_B.jpg]
[Image: A6M2-N_Tail_B.jpg]
[Image: A6M2-N_Tail_Shape_b.jpg]
[Image: MainFloat_b.jpg]
[Image: A6M2-N_MainFloat_Shape_b.jpg]
[Image: A6M2-N_Canpy_Shape_b.jpg]

Type 11, Type 21, Type 32
[Image: M2_HeadRist.jpg]
Reply
#2

Nice work!
Reply
#3

woow,nice to be the first one answering your topic & mod , i really want a6ms as you m8!

and nice you done that mod,il be cheakin that in a minute... great job,keep on!!
Reply
#4

Great Job! Confusedhock: Confusedhock: Confusedhock: Confusedhock:

wow, i did not even notice that zero need some changes :o :o

PS: Black Jack, you aint first :lol: :lol:
Reply
#5

おめでとうございます.

上手にできましたね.

有難うございます.
Reply
#6

Is this a model re work, or the A6M with corrected FM new slot etc?

But apart from that, Awesome great work!!!
Reply
#7

Thank you very much! The higth quality is in the litle details, a lot of litle detail a big improvement!
Hope you still your good and important work, do you will work in another plane? Can you fix P-40?
There a fix, but let holes in P-40e.
TY again!

MOD is LIFE!!
Reply
#8

Thank you very much! Smile
Reply
#9

Thank you!
Reply
#10

Nice effort, but there a number of problems with your mapping now. Did you check the preserve UVs option? Or are you ultimately planing to remap the whole plane? (only consider this if you would also happily shoot yourself in the head)
Reply
#11

A+
Reply
#12

vtrelut Wrote:おめでとうございます.

上手にできましたね.

有難うございます.

+1 !!! Big Grin
Reply
#13

Good job, Japancat-san Big Grin
Reply
#14

Very nice work! Thank's
Reply
#15

うわっ素晴らしい仕事! これは、私たちが飛行機のalotのために正確に必要としているものです!




私が日本語を話さない方法〔道〕のそばで私は翻訳者を使いました
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)