All-Aircraft-Simulations
[WIP] China Map of Hankow - ver1 ready - Printable Version

+- All-Aircraft-Simulations (https://allaircraftsimulations.com)
+-- Forum: IL2 MAP MODS Download & Discussion (https://allaircraftsimulations.com/forumdisplay.php?fid=269)
+--- Forum: 4.09m (https://allaircraftsimulations.com/forumdisplay.php?fid=365)
+---- Forum: IL2 MAP MODS Discussion & WIP MAP 4.09m (https://allaircraftsimulations.com/forumdisplay.php?fid=335)
+---- Thread: [WIP] China Map of Hankow - ver1 ready (/showthread.php?tid=68400)

Pages: 1 2 3 4 5

- redko - 03.03.2010

cgagan Wrote:Problem solved! (persistence rewards...) I used the universal static.ini checker (great little mod, absolutely essential!) and discovered that I had only placed Fabianfred's objects in my MODs folder but not the relevant lines to my static.ini. So I did, and I flew for the first time over your latest creation. Outstanding job as always Agracier, and sorry again for any trouble caused. I grow older and wiser (?), Cheers,

I have no missing entries and objects after testing static checker tool and i have the same problem as you, can't save.
what the fabianfred objects you installed? can you post the entries or pm it to me please?

thanks :wink:

- cgagan - 04.03.2010

Fasbian Fred's objects that come with his Thailand map and can be installed separately; have a look at the relevant thread here at AAA. I am away from home (and home computer) till Sunday and I can't post them to you till then. Cheers,

- redko - 04.03.2010

cgagan Wrote:Fasbian Fred's objects that come with his Thailand map and can be installed separately; have a look at the relevant thread here at AAA. I am away from home (and home computer) till Sunday and I can't post them to you till then. Cheers,

Ok thanks no problem Wink. i don't have Thailand map so i will take a look to his objetcs. thanks Wink

- redko - 08.03.2010

Ok i found:

buildings.House$Highway_Bridge_Long_End
buildings.House$Highway_Bridge_Long_Mid
buildings.House$Highway_Bridge_Short_Mid
buildings.House$Country_Bridge_Long_Mid
buildings.House$Country_Bridge_Long_End
buildings.House$Country_Bridge_Short_End
buildings.House$Country_Bridge_Short_Mid

It comes with dlv Bridges Objects Mod. Download here : http://www.mediafire.com/?2ygmjotwn2i. Now i can fly this babe Wink. By the way it would be nice to have new fmb map from Agracier for Iwo and Palau, the new ones for Kyushu and Okinawa are so nice !

- redko - 08.03.2010

Ok and those having prolems with this missing object:

buildings.House$FurnitureTreeolive

it comes from fabianfred object, and it seems that some version of the pack don't have it which is my case as i already have fabrian's mod. So here is the link to have it :

http://www.mediafire.com/?mmdyz5tdqzy

So all this is in the differents Agracier's topics, so please guys take your time, check for missing objects, use search buttons and you will find all those missing object and then be able to play all Agracier's fantastics maps :wink:

- agracier - 08.03.2010

redko Wrote:By the way it would be nice to have new fmb map from Agracier for Iwo and Palau, the new ones for Kyushu and Okinawa are so nice !

Here is a quickie for Palau

[img][Image: Palaued_m01.jpg]

Here's the download link for the new ed_m files. Also included a new texts.txt file with less psychedelic colored place names. Also noticed that the new updated map for Palau includes newly added ocean areas, which I don't know how to make for the ed-M maps.

So there is a newly edited load.ini as well which deletes the extra thousands of square miles of Pacific Ocean. Maybe someone will know how to fix it so that the new additions are also colored. But for now, this new ed_m map serves the older, original Palau map ...

Before installing don't forget to backup your old files. And this map could use a nice repaint for the textures too ... it's been so long I ever flew here that i forgot that as maps go, it's quite nice.

DOWNLOAD LINK:
http://www.mediafire.com/?tmo0ydgyiz5

For Iwo I'll have to think a bit. It's so small in land area that all it needs really is a nice blue color for the ocean and some flags and a snappy title. Maybe a still from 'Sands of Iwo Jima' or a portrait of John Wayne?

[/img]

- redko - 08.03.2010

People, just repaint the tile.tga file you have the map folder with the blue sea colour from agracier, it's ok then. No more stock blue water.

- redko - 08.03.2010

Hum i still can't save on you map Agracier. I have no more ideas, static checker -last version- says i'm ok no missing object. I can see the map on fmb+ without problem. :roll: Sad .

Would it be possible that i miss something that static checker can't see ? :???: . It must be something like that, aleou map works fine...No missing texture neither.

- agracier - 09.03.2010

redko Wrote:Hum i still can't save on you map Agracier. I have no more ideas, static checker -last version- says i'm ok no missing object. I can see the map on fmb+ without problem. :roll: Sad .
Would it be possible that i miss something that static checker can't see ? :???: . It must be something like that, aleou map works fine...No missing texture neither.

I wish I had other ideas too, but I can think of nothing either. The static.ini checker should be able to find missing objects, at least as far as i know.

I know I've installed and used some pretty obscure object mods, since I want to have them all at my disposal for use. Usually the bridge mod, the FFB objects (Fabianfred's trees and stuff) Canon's Channel Objects, some tarmac textures as objects are the main culprits for not saving on a map.

And if it were a missing texture, then the map simply wouldn't load.

I'll have to think some more on this and I'll take a look at what is in the actors file.

- redko - 09.03.2010

ok thanks.
maybe you could mail me your static file...maybe it's a problem of organisation in mine.. :???:

- redko - 09.03.2010

Thanks for you mails Agracier but problem unsolved. i already have cal objects, it's what i used for Kyushu docs. I guess it's a corrupted object file i can't imagine any other logical solution.
This would explain why for static checker all is there.

I replaced the actor static but it do nothing but i was shure it wasn't the problem. The map load with problem but impossible to save somthing must be missing for me. I will try to reinstall all object one by one.

Thanks

- CzechTexan - 14.03.2010

I can't save missions either. Loads in FMB though. I installed the FFB Olive Tree but there must be something else.
If someone figures this out please report because I'd like to know what it is too.

I noticed alot of FFB's objects were used on the map. I've used them in my Burmalower map and have his Thailand map as well. Perhaps it's not the newest download version? I can't remember since it's been so long ago.

Also, You may have an extreme drop in frame rates as you fly over groups of these objects. I noticed this when I was making Burmalower which was started by Fabianfred. I deleted many of his objects that were grouped together (sadly) because I simply could not fly over the area. For some reason these objects use alot of memory which is unfortunate.

Many of the airfields are not level. Archangelsk and other maps have the same problem.
This can be easily fixed by going into Map_H and coloring the airfield area with the same color, making it all the same height. I believe there is a (kevinP) tutorial for this method and it's really quite simple to do.
To see if an airfield is unlevel... in FMB choose Stationary Ships Runway 2 or 3 and place it over the landing strip. If any of it does not show then it's because the ground is not level and showing through the runway.

I do like the variety of different looking airfields, thumbs up on that. Overall it's a great map! I just wish I could save missions on it :wink:

- agracier - 15.03.2010

redko Wrote:Thanks for you mails Agracier but problem unsolved. i already have cal objects, it's what i used for Kyushu docs. I guess it's a corrupted object file i can't imagine any other logical solution.
This would explain why for static checker all is there.

I replaced the actor static but it do nothing but i was shure it wasn't the problem. The map load with problem but impossible to save somthing must be missing for me. I will try to reinstall all object one by one.

Thanks

If it's any consolation, a yesterday I went back to a map in progress that I started last summer. Which was prior to my install of UP2.0. I could fly around in it and all, it just wasn't finished by a long shot. Anyway, yesterday i went back to that map in progress just to take a look and see how it looked, and by darn if I couldn't get it to save a mission either. And it used to work previously. Now it opens but won't save missions and therefore can't be flown in.

There aren't even many objects in it at present, there are 2 airfields so that should not be a problem. Nor is it a texture problem or anything. Just a map that I made on my install and that now won't work on my own game ...

I am guessing it might have something to do with UP2.0, but have no idea what exactly.

- Graf - 26.03.2010

Can anyone post another link please?

For whatever reason mediafire isn't wanting to process the download on my end(its a first!).

Thanks! Wink

- agracier - 26.03.2010

Try again a few times ... this happens to me with some download sites too ... but usually after 2 or 3 tries the download works