Bridge length
#1

From the FMB+ I can only create bridges of a "standard" length, I can rotate them and adjust their position but I cannot set their length to accommodate for the river width.

I see longer bridges in some maps though, is there a way to do that?

Thanks
Maraz
Reply
#2

Try looking here.

viewtopic.php?p=16246#16246
Reply
#3

I experienced some problems trying to get longer rail bridge to cross a larger river :

in unlocked FMB, it was possible to "merge" two bridges, or three... four..., by using bridgeLeft for first and bridgeRight for second and later bridgeOffset+ bridgeOffset- to get them side by side...
it is possible to repeat operation so you can have a very long rail bridge crossing a lake...

FMB let you save w/o problem... but when you try to reload with the new actor.static saved...
Game crash !

... I didn't find the way to fix it... Sad
Reply
#4

There is no problem creating long bridges in FMB Map Editor.
Follow the link above for tips on how to do it.

In my Rotterdam model I have a very long viaduct made with a single multi span bridge model.

Also two long bridges over rivers to south of Rotterdam at Moerdijk.
Reply
#5

asheshouse Wrote:There is no problem creating long bridges in FMB Map Editor.
Follow the link above for tips on how to do it.

In my Rotterdam model I have a very long viaduct made with a single multi span bridge model.

Also two long bridges over rivers to south of Rotterdam at Moerdijk.

Well I thought also it was possible, I didn't search for confirmation on other maps but it seemed to me I had seen such things before...

... but when I try, I get a game crash everytime I reload with saved actors.static... I don't know why !

Anyway, I took an other way and now... the map is achieved... near final release :wink:
Reply
#6

Sorry, i forgott to answer: You can elongate the bridges by editing the inWing.file. Two following lines are one bridge, the x and y values in every line indicate the outer limit of one basis of a bridge in the bearing of the carriageway.

It's easy if a bridge is positioned at an angle of 90 or 0 degrees, may be you need a calculater if you want to do it with angulated bridges.

It may also be that the "create bridge" in the mapping fmb elonges bridges to the right dimensiones, i never tried this. Ir you try it, please report.
Reply
#7

zipzapp Wrote:Sorry, i forgott to answer: You can elongate the bridges by editing the inWing.file. Two following lines are one bridge, the x and y values in every line indicate the outer limit of one basis of a bridge in the bearing of the carriageway.

It's easy if a bridge is positioned at an angle of 90 or 0 degrees, may be you need a calculater if you want to do it with angulated bridges.

It may also be that the "create bridge" in the mapping fmb elonges bridges to the right dimensiones, i never tried this. Ir you try it, please report.

Confusedhock: Confusedhock: Confusedhock: What a news... how did you find this tip ? I've never read anything about this possibility... really useful
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)