[General Obi-Wan]

I need following objects:



Thanks

[KG64_Cnopicilin]

Nice idea...

[3rd-BG_Dreadpilot]

lol yeah we can take some hot rodded p-51s or zero's thru there! no chance we're getting those red bull racers

[KG64_Cnopicilin]

But they will have to be that kind of objects that can't kill you if you fly into them. IRL they will only let teh air out.

[Plantoid 1]

Hi all:

I have some missions set up flying my trusty LA-7 using smoke (whatever-it-is) - the column that looks like Marge Simpson's hairdo. One problem with it is that when I fly through it there is no damage and in some cases I can't tell if I've hit it or not. So, with that in mind, what I've been doing is fly the course both ways as per the rules, cut a track on it, then score the run after.

A possible fix would be to have one of the chimneys set to destruct when hit but leave no damage to the plane. I'm not even sure that can be done but would be better than having to fly the course twice - once for the run and the second time watching it on the track.

Great days all.

[KG64_Cnopicilin]

Hi all:

I have some missions set up flying my trusty LA-7 using smoke (whatever-it-is) - the column that looks like Marge Simpson's hairdo. One problem with it is that when I fly through it there is no damage and in some cases I can't tell if I've hit it or not. So, with that in mind, what I've been doing is fly the course both ways as per the rules, cut a track on it, then score the run after.

A possible fix would be to have one of the chimneys set to destruct when hit but leave no damage to the plane. I'm not even sure that can be done but would be better than having to fly the course twice - once for the run and the second time watching it on the track.

Great days all.

Its not big job to make 4-5 similar courses in FMB. Just select them and copy few times so you dont even have to restart the mission to fly the track again.

[Plantoid 1]

Hi KG64:

I'm sorry, I was being clever when I said I have to fly the course twice. What I meant was, I fly the course then have to watch the track to see if I fouled any of the obstacles; thus "flying the course twice."

It would save time if I knew I'd hit one of the obstacles and could land then refly the couse after the repair.

As a side note on this: I've found that flying the La-7 requires a course cosiderably larger than if I fly, say, the I-16. On the other hand, I can still fly the course faster and even do outside barrel rolls to line myself up for the next set of obstacles.

Great days all.

[Finnatar]

Hi there.... I've been developing pylons for Red Bull Air Race.... but not without trouble....I haven't managed yet to insert the object
in IL2... one like this:


I have correct scale, pivot axis orientation and msh file seems to be ok, but it refuses to appear in FMB+
I can send it to any of the "experts" to check what's wrong.

I've already posted about that in the maps section.... any help would be greatly appreciated.

S!

[Finnatar]

By the way, the pilon msh is:

[Common]
NumBones 0
FramesType Single
NumFrames 1

[LOD]
500

[Materials]
02 - Default

[FaceGroups]
66 72
0 0 66 0 72 0

[Vertices_Frame0]
-0.000001 303.124847 0.000006 0.000002 0.000004 -20.000002
102.286476 390.346130 59.055119 -10.289240 -5.940492 -16.088572
118.110237 390.346130 0.000000 -11.880990 0.000006 -16.088572
59.055115 390.346100 102.286469 -5.940494 -10.289237 -16.088570
-0.000005 390.346161 118.110237 0.000000 -11.880987 -16.088570
-59.055130 390.346100 102.286461 5.940495 -10.289236 -16.088572
-0.000005 390.346161 118.110237 0.000000 -11.880987 -16.088570
-102.286461 390.346130 59.055122 10.289240 -5.940492 -16.088572
-118.110237 390.346130 0.000018 11.880990 0.000001 -16.088572
-102.286491 390.346130 -59.055096 10.289240 5.940495 -16.088573
-59.055157 390.346161 -102.286461 5.940498 10.289239 -16.088575
-0.000055 390.346130 -118.110245 0.000005 11.880992 -16.088575
59.055061 390.346161 -102.286507 -5.940489 10.289245 -16.088573
102.286423 390.346130 -59.055191 -10.289237 5.940502 -16.088572
118.110237 390.346130 0.000000 19.764929 1.765329 2.496244
21.536381 -347.932953 12.434034 16.997952 9.786924 3.909707
24.868073 -347.932953 -0.000004 19.614120 -0.023253 3.909708
102.286476 390.346130 59.055119 16.234266 11.411286 2.496243
12.434033 -347.932953 21.536385 9.827196 16.974701 3.909706
59.055115 390.346100 102.286469 8.353642 17.999598 2.496242
59.055115 390.346100 102.286469 8.353642 17.999598 2.496242
-0.000007 -347.932953 24.868076 0.023249 19.614120 3.909706
12.434033 -347.932953 21.536385 9.827196 16.974701 3.909706
-0.000005 390.346161 118.110237 -1.765333 19.764929 2.496241
-12.434049 -347.932953 21.536385 -9.786925 16.997950 3.909707
-59.055130 390.346100 102.286461 -11.411287 16.234264 2.496241
-21.536398 -347.932953 12.434037 -16.974701 9.827194 3.909709
-102.286461 390.346130 59.055122 -17.999598 8.353643 2.496242
-24.868088 -347.932953 0.000000 -19.614120 0.023251 3.909711
-118.110237 390.346130 0.000018 -19.764929 -1.765330 2.496244
-21.536398 -347.932953 -12.434040 -16.997953 -9.786923 3.909712
-102.286491 390.346130 -59.055096 -16.234268 -11.411282 2.496245
-12.434055 -347.932953 -21.536388 -9.827200 -16.974699 3.909713
-59.055157 390.346161 -102.286461 -8.353649 -17.999596 2.496247
-0.000017 -347.932953 -24.868086 -0.023258 -19.614120 3.909713
-0.000055 390.346130 -118.110245 1.765323 -19.764931 2.496247
12.434021 -347.932953 -21.536402 9.786916 -16.997957 3.909712
59.055061 390.346161 -102.286507 11.411278 -16.234272 2.496246
21.536373 -347.932953 -12.434059 16.974697 -9.827203 3.909710
102.286423 390.346130 -59.055191 17.999594 -8.353649 2.496245
11.459985 -390.346130 6.616425 17.499928 8.121745 5.271605
13.232851 -390.346130 -0.000001 19.216255 -1.716332 5.271607
6.616425 -390.346130 11.459985 11.094510 15.783602 5.271604
-0.000001 -390.346130 13.232850 1.716326 19.216253 5.271605
-0.000001 -390.346130 13.232850 1.716326 19.216253 5.271605
-6.616426 -390.346130 11.459983 -8.121745 17.499926 5.271607
-11.459985 -390.346130 6.616426 -15.783600 11.094509 5.271609
-13.232851 -390.346130 0.000001 -19.216253 1.716328 5.271612
-11.459987 -390.346130 -6.616423 -17.499929 -8.121742 5.271613
-6.616430 -390.346130 -11.459985 -11.094515 -15.783597 5.271614
-0.000007 -390.346130 -13.232851 -1.716335 -19.216255 5.271614
6.616419 -390.346130 -11.459990 8.121735 -17.499935 5.271612
11.459980 -390.346130 -6.616434 15.783596 -11.094519 5.271608
-0.000001 -390.346130 -0.000001 0.000000 -0.000004 20.000002
13.232851 -390.346130 -0.000001 0.000000 -0.000004 20.000002
11.459985 -390.346130 6.616425 0.000000 -0.000004 20.000002
6.616425 -390.346130 11.459985 0.000000 -0.000004 20.000002
-0.000001 -390.346130 13.232850 0.000000 -0.000004 20.000002
-6.616426 -390.346130 11.459983 0.000000 -0.000004 20.000002
-11.459985 -390.346130 6.616426 0.000000 -0.000004 20.000002
-13.232851 -390.346130 0.000001 0.000000 -0.000004 20.000002
-11.459987 -390.346130 -6.616423 0.000000 -0.000004 20.000002
-6.616430 -390.346130 -11.459985 0.000000 -0.000004 20.000002
-0.000007 -390.346130 -13.232851 0.000000 -0.000004 20.000002
6.616419 -390.346130 -11.459990 0.000000 -0.000004 20.000002
11.459980 -390.346130 -6.616434 0.000000 -0.000004 20.000002

[MaterialMapping]
0.578463 0.998542
0.913808 0.999501
0.830475 0.999501
0.997141 0.999501
1.000000 0.999501
0.163808 0.999501
0.080475 0.999501
0.247142 0.999501
0.330475 0.999501
0.413808 0.999501
0.497141 0.999501
0.580475 0.999501
0.663808 0.999501
0.747141 0.999501
0.830475 0.999501
0.913808 0.054773
0.830475 0.054773
0.913808 0.999501
0.997141 0.054773
0.997141 0.999501
-0.002858 0.999501
0.080475 0.054773
-0.002858 0.054773
0.080475 0.999501
0.163808 0.054773
0.163808 0.999501
0.247142 0.054773
0.247142 0.999501
0.330475 0.054773
0.330475 0.999501
0.413808 0.054773
0.413808 0.999501
0.497141 0.054773
0.497141 0.999501
0.580475 0.054773
0.580475 0.999501
0.663808 0.054773
0.663808 0.999501
0.747141 0.054773
0.747141 0.999501
0.913808 0.000499
0.830475 0.000499
0.997141 0.000499
1.000000 0.000499
0.080475 0.000499
0.163808 0.000499
0.247142 0.000499
0.330475 0.000499
0.413808 0.000499
0.497141 0.000499
0.580475 0.000499
0.663808 0.000499
0.747141 0.000499
0.095614 0.133839
0.095614 0.077876
0.067632 0.085374
0.047148 0.105858
0.039651 0.133839
0.047148 0.161821
0.067632 0.182305
0.095614 0.189802
0.123595 0.182305
0.144079 0.161821
0.151577 0.133839
0.144079 0.105858
0.123595 0.085374

[Faces]
0 1 2
0 3 1
0 4 3
0 5 6
0 7 5
0 8 7
0 9 8
0 10 9
0 11 10
0 12 11
0 13 12
0 2 13
14 15 16
14 17 15
17 18 15
17 19 18
20 21 22
20 23 21
23 24 21
23 25 24
25 26 24
25 27 26
27 28 26
27 29 28
29 30 28
29 31 30
31 32 30
31 33 32
33 34 32
33 35 34
35 36 34
35 37 36
37 38 36
37 39 38
39 16 38
39 14 16
16 40 41
16 15 40
15 42 40
15 18 42
18 43 42
22 21 44
21 45 44
21 24 45
24 46 45
24 26 46
26 47 46
26 28 47
28 48 47
28 30 48
30 49 48
30 32 49
32 50 49
32 34 50
34 51 50
34 36 51
36 52 51
36 38 52
38 41 52
38 16 41
53 54 55
53 55 56
53 56 57
53 57 58
53 58 59
53 59 60
53 60 61
53 61 62
53 62 63
53 63 64
53 64 65
53 65 54


; eof



Any ideas.... ???? Maybe a matrix thing ( I'm totally noob with that, but the worst is that I've found no guide about buildings ).

THX!

[Finnatar]

Well.... after struggling for some time without much help...



Red Bull pylon with 20 meters height ( as real ones ) in game.... still there's a lot of work
to make all types, I'll keep updating progress.

S!

[KG64_Cnopicilin]

Good-looking pylon there, Finnatar!