24.04.2008, 19:18
Mate this is a ripper mod! Can I offer some constructive criticism? The fuselage needs to be deepened a shade (for a clean incorporation of the oil cooler), and the nose lengthened (for the much longer DB-603 based engine). Are you modelling the P.1091 (605 engine) or P.1091a (603 engine)?
I'll assume it's a 1091a with the 632 engine. This actually an adapted 603N which is itself a high octane, high performance version of the 603LA used in the Ta-152, with a two-stage mechanical compressor, an additional turbosupercharger housed in the fuselage (fed by the external exhaust ducts) and an intercooler (total of 3-stage multispeed pre-induction compression). Outputs were expected to be 2400PS at take off and 3200rpm with 1520PS at cruise. It is the engine Kurt Tank had once dreamed about for his Ta-152/153 project. At around 15,000 metres it ought to have put out somewhere in the region of 1900PS (the low-octane 1660PS 603U single prop alternative tested 1430PS at that height for a top speed of around 690km/h). With the 632 engine top speed should be in the order of 725km/h or more but that's not the real benefit of the P.1019, it's altitude performance made the Ta-152H look like a try hard and the design held real benefits in the realm of high altitude strategic reconnaissance. But development was years away at best and it would not be ready for service late in 1944 as requested by the RLM.
Blohm and Voss tested turbosupercharged 603 engines for their BV.155 (ex-Me 155) project. They initially used what seems to be a DB-627 motor (could have been 603S but I think that was the failed Fw-190C engine) based on the 603A but found engine cooling with the turbosupercharger was a critical issue. They later repositioned humongous underwing radiators and switched to the 603U engine based on the 603E, which had a much larger mechanical compressor and higher rated altitude before turbosupercharging. Intercoolers and aftercoolers were fitted in addition, to give some idea of the problems associated with this type of engine.
Considering the poor serviceability of the Ta-152C-0 in game (with its LA motor-no intercoolers like the L engine for the production variants had), I can only imagine the kind of troubles which I think should be included into the P.1091 FM for a genuine historical effect.
Can't wait to download the completed version!
I'll assume it's a 1091a with the 632 engine. This actually an adapted 603N which is itself a high octane, high performance version of the 603LA used in the Ta-152, with a two-stage mechanical compressor, an additional turbosupercharger housed in the fuselage (fed by the external exhaust ducts) and an intercooler (total of 3-stage multispeed pre-induction compression). Outputs were expected to be 2400PS at take off and 3200rpm with 1520PS at cruise. It is the engine Kurt Tank had once dreamed about for his Ta-152/153 project. At around 15,000 metres it ought to have put out somewhere in the region of 1900PS (the low-octane 1660PS 603U single prop alternative tested 1430PS at that height for a top speed of around 690km/h). With the 632 engine top speed should be in the order of 725km/h or more but that's not the real benefit of the P.1019, it's altitude performance made the Ta-152H look like a try hard and the design held real benefits in the realm of high altitude strategic reconnaissance. But development was years away at best and it would not be ready for service late in 1944 as requested by the RLM.
Blohm and Voss tested turbosupercharged 603 engines for their BV.155 (ex-Me 155) project. They initially used what seems to be a DB-627 motor (could have been 603S but I think that was the failed Fw-190C engine) based on the 603A but found engine cooling with the turbosupercharger was a critical issue. They later repositioned humongous underwing radiators and switched to the 603U engine based on the 603E, which had a much larger mechanical compressor and higher rated altitude before turbosupercharging. Intercoolers and aftercoolers were fitted in addition, to give some idea of the problems associated with this type of engine.
Considering the poor serviceability of the Ta-152C-0 in game (with its LA motor-no intercoolers like the L engine for the production variants had), I can only imagine the kind of troubles which I think should be included into the P.1091 FM for a genuine historical effect.
Can't wait to download the completed version!