[Dietz]

So where do I copy & paste all of this?
MODS/MAPMODS/STD/com/maddox/il2/objects/static.ini ...? If the map already works should I bother?
Dietz

Sorry for starting another thread here but this subject is getting lost among the general hubub.
The story so far.
I (like many others I suspect) had no static.ini when I downloaded and installed this map (as per instructions). Canonuk was kind enough to provide his static.ini file However using Canons file (including the blister fix) it was not possible to save missions. Fabian Fred then provided this Static.ini file

[buildings.House$AirdromeHangar1Camo]
Title Hangar1_Camo
MeshLive 3do/Buildings/Airdrome/Hangar1_Camo/live.sim
MeshDead 3do/Buildings/Airdrome/Hangar1_Camo/dead.sim
Body RockBig
Panzer 0.48

[buildings.House$Furniturebale]
Title HayBale
MeshLive 3do/Buildings/Furniture/bale/live.sim
MeshDead 3do/Buildings/Furniture/bale/dead.sim
AlignToLand 0
Body WoodSmall
Panzer 0.20

[buildings.House$Furniturebaletall]
Title HayBaletall
MeshLive 3do/Buildings/Furniture/bale/live.sim
MeshDead 3do/Buildings/Furniture/bale/dead.sim
AddHeightLive 1.4
AlignToLand 0
Body WoodSmall
Panzer 0.20

[buildings.House$T2_Hangar]
Title T2_Hangar
MeshLive 3do/Buildings/Industrial/T2_Hangar/live.sim
MeshDead 3do/Buildings/Industrial/T2_Hangar/dead.sim
Body RockBig
Panzer 0.34

[buildings.House$ChainHomeLow]
Title ChainHomeLow
MeshLive 3do/Buildings/Industrial/ChainHomeLow/mono.sim
MeshDead 3do/Buildings/Industrial/ChainHomeLow_dmg/mono.sim
Body RockBig
Panzer 2.00

[buildings.House$Luft_Hangar]
Title Luftwaffe_Hangar
MeshLive 3do/Buildings/Industrial/Luft_Hangar/live.sim
MeshDead 3do/Buildings/Industrial/Luft_Hangar/dead.sim
AddHeightLive -2.0
AddHeightDead -2.0
Body RockBig
Panzer 0.34

[buildings.House$NorwayLuft_Large_Hangar_Camo]
Title Luft_Large_Hangar_Camo
MeshLive 3do/Buildings/Norway/Luft_Large_Camo/live.sim
MeshDead 3do/Buildings/Norway/Luft_Large_Camo/dead.sim
AlignToLand 0
AddHeightLive -3.6
AddHeightDead -3.6
Body WoodMiddle
Panzer 0.15

[buildings.House$LuftNetted]
Title Luft_Netted
MeshLive 3do/Buildings/Norway/Luft_Netted/live.sim
MeshDead 3do/Buildings/Norway/airshelter_01/dead.sim
AlignToLand 0
Body WoodMiddle
Panzer 0.1

[buildings.House$LuftWood]
Title Luft_Wood
MeshLive 3do/Buildings/Norway/Luft_Wood/live.sim
MeshDead 3do/Buildings/Norway/Luft_Wood/dead.sim
AlignToLand 0
Body WoodMiddle
Panzer 0.1

[buildings.House$NorwayLuft_Large_Hangar]
Title Luft_Large_Hangar
MeshLive 3do/Buildings/Norway/Luft_Large/live.sim
MeshDead 3do/Buildings/Norway/Luft_Large/dead.sim
AlignToLand 0
AddHeightLive -3.6
AddHeightDead -3.6
Body WoodMiddle
Panzer 0.15

[buildings.House$Grass_Pen]
Title Grass_Pen
MeshLive 3do/Buildings/Pacific/Grass_Pen/live.sim
MeshDead 3do/Buildings/Pacific/Grass_Pen/dead.sim
AlignToLand 0
Body RockBig
Panzer 3.00

[buildings.House$Hangarcamo]
Title Hangar_camo
MeshLive 3do/Buildings/Pacific/Hangar_Camo/live.sim
MeshDead 3do/Buildings/Pacific/Hangar_Camo/dead.sim
AlignToLand 0
Body RockBig
Panzer 0.50 //0.20

[buildings.House$Luft_Late_Hangar]
Title Luft_Late_Hangar
MeshLive 3do/Buildings/Pacific/Late_Luft_Hangar/live.sim
MeshDead 3do/Buildings/Pacific/Late_Luft_Hangar/dead.sim
AlignToLand 0
Body RockBig
Panzer 0.50 //0.50

[buildings.House$Luft_Wooden_Hangar]
Title Luft_Wooden_Hangar
MeshLive 3do/Buildings/Pacific/Luft_Wooden_Hangar/live.sim
MeshDead 3do/Buildings/Pacific/Luft_Wooden_Hangar/dead.sim
AlignToLand 0
Body RockBig
Panzer 0.40 //0.50

[buildings.House$Nissen_hut]
Title Nissen_hut
MeshLive 3do/Buildings/Pacific/Nissen_Hut/live.sim
MeshDead 3do/Buildings/Pacific/Metal_hut/dead.sim
AlignToLand 0
Body FuelSmall
Panzer 0.50 //0.015

[buildings.House$TypeJ]
Title TypeJ_Hangar
MeshLive 3do/Buildings/Pacific/TypeJ_Hangar/live.sim
MeshDead 3do/Buildings/Pacific/TypeJ_Hangar/dead.sim
AlignToLand 0
Body RockBig
Panzer 0.50 //0.50

[buildings.House$RussiaKievCstationHigh]
Title RussiaKievCstationHigh
MeshLive 3do/Buildings/Russia/Kiev/Cstation/live.sim
MeshDead 3do/Buildings/Russia/Kiev/Cstation/dead.sim
Body RockBig
AddHeightLive 20.0
AddHeightDead 20.0
Panzer 0.6 //0.2

[buildings.House$46CraneBig1High]
Title 46CraneBig1High
MeshLive 3do/Buildings/46/CraneBig1/live.sim
MeshDead 3do/Buildings/46/CraneBig1/dead.sim
AlignToLand 0
AddHeightLive 40.0
Body RockMiddle
Panzer 1.0 //0.1

[buildings.House$46CraneBig1WHigh]
equals buildings.House$46CraneBig1High
MeshLive 3do/Buildings/46/CraneBig1_W/live.sim
MeshDead 3do/Buildings/46/CraneBig1_W/dead.sim
AlignToLand 0
AddHeightLive 40.0
Body RockMiddle
Panzer 1.0 //0.1

[buildings.House$AirdromeMaskingnet4]
Title Airdrome_Maskingnet4
MeshLive 3do/Buildings/Airdrome/Maskingnet4/live.sim
MeshDead 3do/Buildings/Airdrome/Maskingnet4/dead.sim
AddHeightLive 3.1
AlignToLand 0
Body WoodSmall // FIXME: need special type 'Cloth'
Panzer 0.0001

[buildings.House$AirdromeMaskingnet6]
Title Airdrome_Maskingnet6
MeshLive 3do/Buildings/Airdrome/Maskingnet6/live.sim
MeshDead 3do/Buildings/Airdrome/Maskingnet6/dead.sim
AddHeightLive 6.0
AlignToLand 0
Body WoodSmall // FIXME: need special type 'Cloth'
Panzer 0.0001

[buildings.House$Blisterhangar]
Title Blister_Hangar
MeshLive 3do/Buildings/Pacific/Blister/live.sim
MeshDead 3do/Buildings/Pacific/Blister/dead.sim
AlignToLand 0
AddHeightLive -7.0
AddHeightDead -7.0
Body RockBig
Panzer 0.50 //0.20

This file enabled me to save missions but the only objects visible in the map were canons custom objects. (For example Maidstone didnt have a single building) I should also point out that this is the only static.ini that has enabled me to save missions. A second static.ini from Fabian fred wouldnt let me save.
Now this morning I saw a default static.ini had been released so I downloaded that and following the instructions added the lines needed for this map. I then replaced ther above static.ini with this one.

At this point I was going to include the static.ini file I made but it was too long. anyway it consisted of the default static.ini posted this morning with the additional lines needed for the channel map (ncluding blister entry)

Now I am back to being unable to save a mission on the map. What is the difference between the two static.inis that would prevent me from saving a mission when using the second one?
Yes its all to easy to say wait for the final version, but the fact that I am having these problems while others are not would tend to suggest there is a problem with my setup which is why I want to eradicate this problem now.
I hope someone can get to the bottom of this and solve the problem and thanks to everyone who is already trying. I am sure I am not the only one who is waiting for a solution to this problem