13.08.2011, 07:13
The title pretty much says it .
Since I installed IL2 and UP3 and 2 mods, framerate has been horrible if I go close to the ground. Above 2500-3000 meters I get constant 50-60 fps.
Low altitude results in framerate barely over 30 fps . but most of the time 23-27 fps. This gets extremely frustrating in online play since in there,
most of the time, engagements happen bellow 1500 meters. And than the huge quantity of aircraft and objects on the ground on servers like Spit vs 109 just adds to the problem.
My previous PC ran IL2 with UP2.01 with a bunch of mods just fine and now, armed with a much better PC, I thought I will run IL2 with like 100FPS maxed out in every possible way.
Well needless to say, IL2 had other plans.
I'm running IL2 with 1920x1080 resolution
Antistropic filtering 16x
V-sync on
Anti aliasing 16x CSAA
4x supersampling
I have these mods enabled in JSGME
#UP#_Enable_UP3.0
KK_Sound_Mod_UP3.0_RusPs_=NIK=
Effects_Mod_RPs3.01
I'm using Open GL in IL2
[Render_OpenGL]
TexQual=3
TexMipFilter=2
TexCompress=0
TexFlags.UseDither=1
TexFlags.UseAlpha=0
TexFlags.UseIndex=0
TexFlags.PolygonStipple=1
TexFlags.UseClampedSprites=0
TexFlags.DrawLandByTriangles=1
TexFlags.UseVertexArrays=1
TexFlags.DisableAPIExtensions=0
TexFlags.ARBMultitextureExt=1
TexFlags.TexEnvCombineExt=1
TexFlags.SecondaryColorExt=1
TexFlags.VertexArrayExt=1
TexFlags.ClipHintExt=0
TexFlags.UsePaletteExt=0
TexFlags.TexAnisotropicExt=1
TexFlags.TexCompressARBExt=1
TexFlags.TexEnvCombine4NV=1
TexFlags.TexEnvCombineDot3=1
TexFlags.DepthClampNV=1
TexFlags.SeparateSpecular=1
TexFlags.TextureShaderNV=1
HardwareShaders=1
Shadows=1
Specular=2
SpecularLight=2
DiffuseLight=2
DynamicalLights=1
MeshDetail=2
VisibilityDistance=3
Sky=2
Forest=1
LandShading=3
LandDetails=2
LandGeom=2
TexLarge=1
TexLandQual=2
TexLandLarge=1
VideoSetupId=3
Water=1
Effects=1
ForceShaders1x=0
PolygonOffsetFactor=-0.15
PolygonOffsetUnits=-3.0
[QMB]
PlaneList=1
My specs are :
Win7 64bit
RAM=4gigs
Vcard=GTX460 1 gig
1 Terabyte HDD
Quad core 3.00 GHz
I hope you guys can help somehow. It's a huge shame that I have a PC of this kind and IL2 justs kicks it in the nuts.
Regards, Andris
Since I installed IL2 and UP3 and 2 mods, framerate has been horrible if I go close to the ground. Above 2500-3000 meters I get constant 50-60 fps.
Low altitude results in framerate barely over 30 fps . but most of the time 23-27 fps. This gets extremely frustrating in online play since in there,
most of the time, engagements happen bellow 1500 meters. And than the huge quantity of aircraft and objects on the ground on servers like Spit vs 109 just adds to the problem.
My previous PC ran IL2 with UP2.01 with a bunch of mods just fine and now, armed with a much better PC, I thought I will run IL2 with like 100FPS maxed out in every possible way.
Well needless to say, IL2 had other plans.
I'm running IL2 with 1920x1080 resolution
Antistropic filtering 16x
V-sync on
Anti aliasing 16x CSAA
4x supersampling
I have these mods enabled in JSGME
#UP#_Enable_UP3.0
KK_Sound_Mod_UP3.0_RusPs_=NIK=
Effects_Mod_RPs3.01
I'm using Open GL in IL2
[Render_OpenGL]
TexQual=3
TexMipFilter=2
TexCompress=0
TexFlags.UseDither=1
TexFlags.UseAlpha=0
TexFlags.UseIndex=0
TexFlags.PolygonStipple=1
TexFlags.UseClampedSprites=0
TexFlags.DrawLandByTriangles=1
TexFlags.UseVertexArrays=1
TexFlags.DisableAPIExtensions=0
TexFlags.ARBMultitextureExt=1
TexFlags.TexEnvCombineExt=1
TexFlags.SecondaryColorExt=1
TexFlags.VertexArrayExt=1
TexFlags.ClipHintExt=0
TexFlags.UsePaletteExt=0
TexFlags.TexAnisotropicExt=1
TexFlags.TexCompressARBExt=1
TexFlags.TexEnvCombine4NV=1
TexFlags.TexEnvCombineDot3=1
TexFlags.DepthClampNV=1
TexFlags.SeparateSpecular=1
TexFlags.TextureShaderNV=1
HardwareShaders=1
Shadows=1
Specular=2
SpecularLight=2
DiffuseLight=2
DynamicalLights=1
MeshDetail=2
VisibilityDistance=3
Sky=2
Forest=1
LandShading=3
LandDetails=2
LandGeom=2
TexLarge=1
TexLandQual=2
TexLandLarge=1
VideoSetupId=3
Water=1
Effects=1
ForceShaders1x=0
PolygonOffsetFactor=-0.15
PolygonOffsetUnits=-3.0
[QMB]
PlaneList=1
My specs are :
Win7 64bit
RAM=4gigs
Vcard=GTX460 1 gig
1 Terabyte HDD
Quad core 3.00 GHz
I hope you guys can help somehow. It's a huge shame that I have a PC of this kind and IL2 justs kicks it in the nuts.
Regards, Andris