B-25 Strafer
#16

Rafael Wrote:You guys might want to take a look at this

http://forums.ubi.com/eve/forums/a/tpc/ ... 6411051045
Thanks Rafael, but I have already seen it. Nice skins, but for J/H version.
Reply
#17

Thanks for the comment but seeing that I posted this really late after getting excited over a solid nose, I never clearly stated what I wanted to say.

What I had meant to point out is there is a was to trick the system into skinning the glazed version, how that can be used with this mod I am not sure.

If however, an option were to be included in the arming screen (toggle switch, solid/glazed) ) that would be very cool. If the adding the B25 solid nose requires one of the B25's to be sacrificed, I suggest killing all together the Lerche and adding a new folder called B25J_Solid to the game, add the 8 50's in the nose and be done with it.

Now on the B25 shown. What you modeled is the late B25C painted glazing version. To be correct the bottom turret would need to be removed and the turret fuselage position skinned over. The two cheek guns on either side should be the early type (smaller in size and lower on the fuselage); the rear gunner position should have the glazing dome removed and either a single or dual 50 be placed in the rear gunner position.

If however you want to model a field modified D strafer (painted glazed nose), you can use the J body, move the J turret aft as you currently have placed it, retain the waist gunner position and paint the glazed area after adding 4'50's . Hence the armament would be identical to the J with the slight modification of moving the top turret aft.


Again, if sacrificing one of our B25's so we can use a D model I'd really have to think about it. It would be best if we could add a new folder and plane to the game or kill the Lerche and place the B25D strafer in its place.


While I'm at it, the C and G have needed the bottom turret removed since they were included in the game. Also, the antenna mast in the J is in the wrong place. It should be moved off center above the waist gunner and the antenna wire should lead from the left rudder to just behind the pilot rear window.

If you need 345th BG 498th BS 'Falcons' generic skins talk to Skunk. Also, if you need photos, PM me.
Reply
#18

Thanks a lot for info Rafael! Your remarks are right, but we have no much capabilities now to do it all. To add 4 guns in nose is not easy for me; to add 4 cheek guns is simply impossible (i can do it only using B-25J fuselage, but it's wrong for Strafer). Single rear gun is not simply too.

Guys, i just want to say: NO adding/deleting guns or weapons. Only moving. It's reworked B-25J, remember it. I use it because it carry parafrags and many guns.
Reply
#19

WIP:
exernal model done, runs well.
Now i'm working at skin&cockpits

Reply
#20

MAHA Wrote:Guys, i just want to say: NO adding/deleting guns or weapons. Only moving. It's reworked B-25J, remember it. I use it because it carry parafrags and many guns.

We can removing guns.
Reply
#21

ranwers Wrote:
MAHA Wrote:Guys, i just want to say: NO adding/deleting guns or weapons. Only moving. It's reworked B-25J, remember it. I use it because it carry parafrags and many guns.

We can removing guns.
Please write how I can do it. :roll:
Reply
#22

oh man... just got into this thread... been afk all weekend.

MAHA these look great. MMy suggestion would be to use the H slot, then you could have the 4 gun pack, plus the 4 guns in the nose, make it look like the C model and then its all done.
Reply
#23

It is very promising that Mod!

For the final format, I suggest you install it in place of one aircraft "ace" ( "Durand Yak-9T", "Safonov I-16 Type 24", "Pokryshkin MiG-3", etc. .. .), which are no longer useful for a long time
Reply
#24

hey MAHA, just thought id drop a line to see how these were shaping up.
Reply
#25

Hi all. My modding is stopped because i can't add guns. Now Strafer has only 1 gun (using 5-guns B-25J class). I don't know how to use Jawa, sorry. If you want, i can share my today's Strafer.
Reply
#26

if you were to use the b25h slot, you could have 8 guns. four in the nose, plus 4 on the sides, plus the cannon. then just use the b25c model? or does it not work this way?
Reply
#27

I use B-25C because B-25J(H) fuselage it's wrong for 'D' Strafer.

Work still in progress, now i know a methot to make Strafer with 5 working nose guns (like J). But i want find the best way to do it. Be patient! Big Grin
Reply
#28

well, as you know, those who play this sim know nothing but patience, even though very few display it. I, as well as everyone else im sure, really appreciate the work you are doing on this project, MAHA. I just dont understand what the limitations are, because i havent done any mods myself.

im just an idea man Big Grin
Reply
#29

This is one of the first planes I'm looking forward to after we can add entire new aircraft. I would love to have this thing with all it's rightfull guns in their correct places Wink.
Reply
#30

OK guys, first beta done! 8)

BIG BIG BIG thanks to Monguse for default skin.

I'm still need to correct (delete some) cockpits.

Enjoy!!!

[Image: grab0056.jpg]

http://aviaskins.com/vb/attachment.php? ... 1203617737
Reply


Forum Jump:


Users browsing this thread: 10 Guest(s)