[qyjackal]

I am an IL-2 player,using X52.

Now,I have found a very odd problem:
the Z rotation is normal in the driver test,but it couldn't adjust from 0 to 100 smoothly (if you twist the RH of X52 a little, the rudder to be 100%!!!)in the IL-2 Game!!! Never happened this! I can't endure this for it effects my shooting.

Why could this happen??? It is normal in the driver test!!(OS:XP) But abnormal in the IL-2 Game!!! I think the hardware is OK. It maybe a software problem.

I have tried every method I know but no result eventhough I have reinstalled the Game!!

Could anyone here help me?? I don't want to reinstall my OS!!!!!!
I am very worried about that!!

[walter_solito]

Have you check if in the hotas section in the controls panel the rudder is really set in z axe?

Usually full rudder is applyed by a key control!

walter

[qyjackal]

yes I have checked the hotas control, it is correct
and the full rudder control is the default key: Z and X

[Junkers]

In the main menu go to Hardware/Inputs. Where it says Joystick Axes select the YAW axis and you should see this .

[qyjackal]

I have entered the INPUT SETUP, and the YAW axis can't adjust smoothly......

If I twist the Z rotation a little (less than 5% stroke), the output signal (the green block)move to the end immediately!

[Junkers]

Are the sliders on the right of your screen set to the same values as the ones in the picture?

[qyjackal]

YES!
Each slider is just as same as the picture!

[Junkers]

I don't know what the problem could be, when did it start? Is the joystick new or did you change any settings?

[qyjackal]

My Joystick is just bought last year~!

Could you give me some other addresses of FORUM on IL-2 and SAITEK X52 ??

I am not very familiar with those forums......

Thanks a lot!

[Junkers]

Try these two links:

http://forums.ubi.com/eve

http://forum.1cpublishing.eu/index.php?s...df6b28cfda

[RRuger]

I've noticed this too and for me it's been going on for about 3 weeks. The rudder control works fine in tests but when ingame it's hard left turn till I get it straightened out. The only way that I've found straightens the rudder is to rotate hard left and right and snap the joystick when I release it. Takes a few trys but eventually it straightens out.

[qyjackal]

Hi RRuger,
Could you tell me how to straighten the problem out more detailedly?
When I rotate hard left and right, snap what part of X52??