[viking4570]

If you everything else works as you say but you just don't see it in the drop downs in the qmb+ be sure there is some problem in the way it's listed conf.ini. - viking

Thanks.. Still can't get it to go. I added another new map, and seems like any map over the 32 I have doesn't show in QMB... oddness..

post your quick section from your conf.ini and let's have a look. - viking

[Quelty]

If you everything else works as you say but you just don't see it in the drop downs in the qmb+ be sure there is some problem in the way it's listed conf.ini. - viking

Thanks.. Still can't get it to go. I added another new map, and seems like any map over the 32 I have doesn't show in QMB... oddness..

Spinnetti,
Can you post the [Quick] bit of your conf.ini, should look a bit like;

Code:

[quick]
Custom0=Ardennes_W
Custom1=GW_Ardennes
Custom2=Balaton

Cheers

Quelty

[Spinnetti]

Thanks folks... Here's my quick entries..

[quick]
Custom0=NWEurope
Custom1=MTO
Custom2=Bessarabia
Custom3=BoB
Custom4=CAN_Channel
Custom5=dlv_Sinai
Custom6=fly_Z_BOB_A
Custom7=fly_Z_Britain_Autumn
Custom9=GW_Ardennes
Custom10=GW_Ardennes
Custom11=GW_Murmansk
Custom12=GW_Norway
Custom13=GW_Stalingrad
Custom14=Kt_eastafrica
Custom15=LAL_Crim2_mud
Custom16=LAL_Crim2_winter
Custom17=Mbug_Slovakia_winter
Custom18=Midway
Custom19=Murmansk_Winter
Custom20=Net5Summer
Custom21=Philippines dvl_Philippines
Custom22=Stalingrad_Winter
Custom23=tab_ardennes ardennes
Custom24=The_Slot_1-44
Custom25=V1_Summer_1944
Custom26=vol_ItalyAfricaGreece
Custom27=Vol_Sardegna
Custom28=zip_Alpen
Custom29=Zuti_Slovenia_Off_W
Custom30=ER_Lybia
Custom31=ER_Philippines
Custom32=vkg_Crete

[Quelty]

Here's your problem;

Code:

Custom8= Mapname

is missing, add it and you should be good to go

Cheers

Quelty

[Pigeon]

I can only load your map in FMB ...but can't save any mission ...can't run it !

Is it due to my Unif. Installer 1.0 ??

You mentioned that it requires Unif. Installer 1.1.1 ... at page 1.
(I can only find version 1.1)

Please comment...

[viking4570]

I can only load your map in FMB ...but can't save any mission ...can't run it !

Is it due to my Unif. Installer 1.0 ??

You mentioned that it requires Unif. Installer 1.1.1 ... at page 1.
(I can only find version 1.1)

Please comment...

1.1.1 patch can be found here - it should solve your problem. -viking
(The link is inoperative)

[Spinnetti]

Here's your problem;

Code:

Custom8= Mapname

is missing, add it and you should be good to go

Cheers

Quelty

Got it, thanks... Odd thing was, only crete and slovenia wouldn't show. everything else did.

[Pigeon]

I can only load your map in FMB ...but can't save any mission ...can't run it !

Is it due to my Unif. Installer 1.0 ??

You mentioned that it requires Unif. Installer 1.1.1 ... at page 1.
(I can only find version 1.1)

Please comment...

1.1.1 patch can be found here - it should solve your problem. -viking

(The link is inoperative)

Patched it ...and still no luck ?
Installed vour Crete again, now it appears twice in FMB...?

When I start my sim the first screen displays 1.0 ?
:roll:

[Pigeon]

This map looks gorgeous at screens, so I must try again and again...

I would like to re-try with a clean install of Crete.

So, to clear the present install :
Can somebody tell me what this map-installation consists of (elements) ?
What folders&files should I delete ? What file should be edited (lines deleted) ?

Anybody ???
:roll:

[viking4570]

This map looks gorgeous at screens, so I must try again and again...

I would like to re-try with a clean install of Crete.

So, to clear the present install :
Can somebody tell me what this map-installation consists of (elements) ?
What folders&files should I delete ? What file should be edited (lines deleted) ?

Anybody ???
:roll:

To uninstall this map - delete the folder: mods/mapmods/maps/-tex/land/summer/vkg_Crete
and the folder: mods/mapmods/maps/vkg_Crete
and delete this line form your all.ini file: vkg_Crete vkg_Crete/load.ini

the all.ini file is a file located in mods/mapmods/maps

But before you do that - if you see it listed twice in the fmb, it is because it is listed twice in the all.ini. Delete one of the instances to solve that problem.

Now, to solve the problem of missions on your map not saving: You said you had UI1.0, and that you found 1.1, so I directed you to the 1.1.1 patch. But if you don't have 1.1 installed I'm not sure that installing 1.1.1 over 1.0 will work.

In summary:

A map won't save a mission if your game does not have objects installed (buildings, etc) that the map in question is using. The Crete map uses objects from LAL Rone's hangar mod, and blank field plates that are included in 1.1.1. Look at this thread to see how you can see what objects you have installed, and note my post towards the end of the thread -

viewtopic.php?t=16258&start=30

If you can't figure out from this how to tell what you are missing - let me know. And I will help you. Cheers - viking

[Pigeon]

Thanks mate!

Before I proceed with investigation, just to clear:

a) 1.1.1 patch should generally be applied after 1.1 UI installation ?
It is not upgrade from 1.0 UI to 1.1.1 ?

Right ?

[viking4570]

Thanks mate!

Before I proceed with investigation, just to clear:

a) 1.1.1 patch should generally be applied after 1.1 UI installation ?
It is not upgrade from 1.0 UI to 1.1.1 ?

Right ?

Correct. -viking :wink:

[viking4570]

I've prepared an update for the Crete map -

v1.3 contains:

refined BumpH and tree files, a updated map_T which eliminates some texture anomalies, and best of all, indexed ed maps and texture files for faster load times and reduced HD space.

You can get v1.3 here:

http://www.mediafire.com/?vwrnom02jmm

This download is half the size of the original.

Cheers - viking

[Guest]

thanks man Nice ground textures :!:

[Lejo]

Would love to give it a try but when I click on your Mediafire link I press "click here to start download" and it says "your download is starting..." the usual recipe but nothing happens this time besides a white empty page...

EDIT: After 5 times trying it works! Downloading now!