[Rowddy]

Hi all

Weirdest thing happened yesterday i wanted to start a new Pacific capmpaign so select a Dgen campaign (my favourites) and this what happened......

i select a campaign that went OK, i select all the planes that went also OK, then i clicked on the campaignselect and it loaded normally. then the map with 1th mission briefing came up just normally so i select weapon loadout and clicked OK. The mission went loading all the way up to 100% and then i crash to desktop it get a pop-up screen that says in the title:
IL-2 Sturmovik Forgotten Battles. IL2FB EXE. Applicationerror

then it says this:

The instruction on 0x0fdf0a57 directs to memory on 0x11fc85a8. De read or writeapplication (read) on the memory has failled. klick here to end the programm.

Now the weirdest thing is that this goes only for all the Pacific Campaigns (DGen or not DGen) from all countries except this campaign ComAirSols: VMF 213 Hell hawks part 1 and 2. (which is also Pacific)/

All the european campaigns Russia, RAF, Luftwaffe, etc. work completly normal. both DGen and non DGen.

I have downloaded and installed 99% of all MODS and always tested if the work properly before going further. i played pacific campaigns before just not that often so i don't know when it started.

Does anyone has an idea of what it could be? I thought it was Stab at first cousing this problem i have reinstalled it and it didn't solve the problem

Regards Rowddy.

[madcop]

Hello Rowdy

The same thing happened to me this morning.
It happened after I installed MIKER 8 carriers ( HMS INDOMITTABLE and BUNKER HILL ).
When I started his F4U1-D Full Mission I received this message at the end of the mission loading time.
"The instruction at "0x0x0fdc0a57" referenced memeory at"0x113f91a0".The memory could not be "read"
Click on OK to terminate the prog.

So did I and I started the game again , choosing a basic single mission involving a carrier landing exercise.
All went O.K. untill I was about to touch the landing deck , and this time I received the message

"The instruction at "0x0x0fdc0a57" referenced memeory at "0x113a9140".The memory could not be "read"
Click on OK to terminate the prog.

So did I.

I started again and choosed a QMB+ mission sowehere in NORWAY.
As soon as I flew over the top of a german cruiser or bigger I received the same message again !.(second one).

I then try a mission on the same theatre but not involving ship and everything went OK.

Do not know what to do.

I desabled MIKER "AlterdDefaultShipSkins" mod but with no better result .

MADCOP

[miker8]

wow! that ain't funny, madcop to be on the save site , did you delete the alterdDefaultShipSkins folder or just put an [- ] infront of the folder, when you deleted it completely it would be a cleaner approach to the problem, let me know m8, another thing did you also installed Straswa's mod, if so delete or disable those too

[miker8]

... just played all kinds off pacific missions and campaigns , ...don't encounter any errors you both have sofar, and believe me the way my texture mod installs is 100% the same structure I have in my game , further more ,madcop the fact that you disabled my mod didn't solve the prob so it must be something else...I think about the included single missions but thats a bit far fetched cause campaigns and Dgen are not affected by separate single missions

[miker8]

Rowddy, m8 did you also installed the new USS bunker Hill skin mod yesterday before you played the Pacific Dgen campaign ?

[madcop]

... just played all kinds off pacific missions and campaigns , ...don't encounter any errors you both have sofar, and believe me the way my texture mod installs is 100% the same structure I have in my game , further more ,madcop the fact that you disabled my mod didn't solve the prob so it must be something else...I think about the included single missions but thats a bit far fetched cause campaigns and Dgen are not affected by separate single missions

Hello Miker.

1-I installed your Mod ( Bunker Hill and INDOMITTABLE) after having removed the former "new ship texture" you issued before the Bunker Hill.( I took it out of the MODS folder ).

2-I didn't had any problem with your INDOMITTABLE.( Your "newshiptexture" mod )

3-Problem started with 1.

4-Used to play Single Mission/RN/landing exercise on carrier mission without any problem before the 1 install.

5-Must admit I only desabled your Bunker Hill and INDOMITTABLE mod by adding "-" in front of it.

6-Being at work now , I can't test again after having completely removed your mod ( Mod-Mission-Painting Scheme ).

7-Sure my problem started with the installation of your last mod, sorry for that because your carriers are so GORGEOUS!.

8-It looks like being on the verge of touching down on a carrier ( with your nose on the treshhold ) or on another ship ( by flying just above the masts) is starting the bug.

9-Back at home tonight , I ll try other missions with and without ships on different ETO and PTO maps and I'll keep you posted.

Question.

Could this have something to do with the Ship pack 2 ?

Thanks for all your efforts to keep Il2 the best WWII aviation simulator.

Madcop.

[Spinner]

Hi Rowdy, Madcop & Miker8,

I had a very similar experience to one of yours about a week ago. When flying in the pacific maps and coming in to land on a carrier, i would ctd with the same (or similar) access violation message right at the edge of the carrier.

My problem turned out to be Zuti's updated Slovenia map and the mod supplied with it.
The mod is called "01 Zuti Airfieldsmod"

I found when this mod was disabled, all was ok.

I contacted Zuti and he got back to me with an adjusted version of the mod "01 Zuti Airfieldsfrictionmod" which solved my problem.

You can find out if this mod is the problem by putting a dash in front of the name and running a test flight.

If it is the problem, Zuti has the new version at File Front. Go to the Zuti Slovenia thread in the maps section here and click on the download link. There you will see a list of Zuti's work.Download the "01 Zuti Airfieldsfrictionmod"

When Zuti supplied me the new mod it was in an e-mail to me and was not in an exe format. I just dropped it in my mods folder. I "assume" that that is what the exe will do. If you are concerned, maybe contact Zuti and confirm that that is what the "01 Zuti Airfieldsfrictionmod" download is for or if you like, I can pm the mod to both of you.

Hope you resolve your problem soon.

Spinner

[miker8]

Thx for your post Spinner, I hope it wil solve their problems, yes I had that same thing with o1 Zuti's Airfields mod last week [ btw thats an awesome map he made...] but would never have guessed it could be related to these problems, weird'

madcop, Rowddy, looking forward to your posts if this is the solution to the problems you have, cya

[Rowddy]

Hi Spinner & Miker8 thanks for your reply it was very helpfull and you were so right it was "01 Zuti Airfieldsmod" i go and see if i can find his other MOD "01 Zuti Airfieldsfrictionmod" to solve the problem. Thanks very much. i never ever found this one out by myself.

Just DL it and i cannot install it lol it says the system cannot find the select path.

this is my Path i see in the EXE i just downloaded C:\Games\Ubisoft\IL-2 Sturmovik 1946\ This is the correct path so i dunno what is going wrong here.

Anyone got an idea on how to fix this? i think it all works afterthis 100% again.

Regards Rowddy.

[madcop]

Hi Spinner & Miker8 thanks for your reply it was very helpfull and you were so right it was "01 Zuti Airfieldsmod" i go and see if i can find his other MOD "01 Zuti Airfieldsfrictionmod" to solve the problem. Thanks very much. i never ever found this one out by myself.

Just DL it and i cannot install it lol it says the system cannot find the select path.

this is my Path i see in the EXE i just downloaded C:\Games\Ubisoft\IL-2 Sturmovik 1946\ This is the correct path so i dunno what is going wrong here.

Anyone got an idea on how to fix this? i think it all works afterthis 100% again.

Regards Rowddy.

Hello Spinner,Hello MIKER and Rowdy

Thanks a lot for your discovery !.Poor old ZUTI was in fact the one to shoot at .I just desable his 01_ZUTI_AirfieldsFrictionMod and everything went back to the normal.

I hope ZUTI is going to cure his Mod illness.
Maybe you could PM me the patch ?

Thanks a lot

Madcop

[Spinner]

Glad I could help. I would be happy to e-mail the corrected mod to both of you. This is the mod Zuti sent me to replace the original one that seemed to be causing the problem.

Just pm me your e-mail addresses and I willsend it off to you.

Spinner