[QWE]

Hi i got Up 2.0m with MDS 1.12 and i want to make a mission with glider towing, in FMB i set points for He-111 Z and i set points with Me-321 and i connect those points 1. with 1. etc until the bombing point where i set landing for Me-321 as a invasion,
and here is ---- when they spawn in the air , ME-321 is not towed by He-111Z , and next!! when they start on base is everything right but seconds after start that glider in the air releases himself and flying elsewhere
PLS help!!!!

[8FS_Bulau]

..i set points with Me-321 and i connect those points 1. with 1. etc until the bombing point where i set landing for Me-321 as a invasion...

Lay out the course for the He-111Z. Then set only ONE Normal Flight waypoint for the Me-321, near the first waypoint of the He-111Z, and use Set target button to attach glider to towplane.

The glider will release and land automatically at the waypoint before a GAttack waypoint of the towplane, so have a waypoint for the He-111Z at the location you want the glider to release, then place another waypoint AFTER that one, and make it a GAttack waypoint (for the He-111Z)

Do not set any other waypoints for the glider.

[QWE]

----near the first waypoint of the He-111Z, and use Set target button to attach glider to towplane.-----

but if i want them to start together need i to atache the glider to start waypoint or the number 1 waypoint??
of course thx for answer

[8FS_Bulau]

The very first waypoint for both, which is numbered 0 (zero).

[QWE]

ok they can start together --- but they can not spawn togehter in the air !! ?? :/
i got course for He-111 and one point for Me-321 and atached it for point zero of He-111

[8FS_Bulau]

Whether they spawn on the runway or in the air depends on how you set the first waypoint of the He-111Z. If it is a takeoff waypoint, then they start joined on the runway. If it is a Normal flight waypoint, then they will start in the air.

[QWE]

i don know why but now it works --no matter
THX all of you for your help

[Deutschmark]

Salute ALL hi ;-)

i don know why but now it works --no matter
THX all of you for your help

Ok then this post is no longer needed.
Glad it worked out for you




Deutschmark
WW1 Project Member.