02.01.2012, 03:44
Hello!
As you may know, I'm looking for the best PC for about 1000€, and unlike last thread now I'm actually buying one.
So far I have two choises:
Core i7 2600K, LGA1155, 3.4 GHz, 8MB 285,90 €
Club 3D GeForce GTX 560 Green Edition 179,80 €
Club 3D GeForce GTX 560 Green Edition 179,80 €
Z68 Extreme3 Gen3, LGA1155, Intel Z68, DDR3, PCI-E 3.0, ATX 125,80 €
1TB Barracuda 7200.12, SATA III, 7200rpm, 32MB 159,80 €
Kingston ValueRAM DIMM 4GB PC3-10667U CL9 (DDR3-1333) 23,90 €
Kingston ValueRAM DIMM 4GB PC3-10667U CL9 (DDR3-1333) 23,90 €
Coolermaster HAF 912 Plus 84,90 €
650W 650AX, ATX2.31-virtalähde, 80+ Gold 132,90 €
SH-222AB/BEBE, DVD±RW 22X DL Musta, Bulk 23,00 €
total 1 219,70 €
Core i7 2600K, LGA1155, 3.4 GHz, 8MB 298,00 €
AMD Radeon HD 6950, 2GB DDR5, 2XDVI/HDMI 272,00 €
P8P67, Rev 3.0, LGA1155, Intel P67, DDR3, SATA III, USB 3.0, ATX 124,40 €
1TB Barracuda 7200.12, SATA III, 7200rpm, 32MB 129,00 €
4GB, DDR3 1333MHz, CL9 24,00 €
4GB, DDR3 1333MHz, CL9 24,00 €
CM Gladiator 600 ATX-kotelo, musta 78,00 €
650W Toughpower QFan, Cable Management, ATX-virtalähde 125,00 €
SH-222AB/BEBE, DVD±RW 22X DL Musta, Bulk 23,00 €
total 1 097,40 €, with two GPUs 1 369,40 €
The prices sure have gone up, I thought they'd go down but no
So, which one would you prefer and why? Also, is there anything wrong with those setups? Like overpriced parts, bad selections or other.
If you need I can post the excel sheet I have on the builds, it has ATI and nVidia configurations in 3 different shops.
EDIT: The goal is to run FSX and BF3 maxed out and be future proof. The i7 might sound a bit overkill but I need 8 virtual cores for 3D modeling and rendering.
As you may know, I'm looking for the best PC for about 1000€, and unlike last thread now I'm actually buying one.
So far I have two choises:
Core i7 2600K, LGA1155, 3.4 GHz, 8MB 285,90 €
Club 3D GeForce GTX 560 Green Edition 179,80 €
Club 3D GeForce GTX 560 Green Edition 179,80 €
Z68 Extreme3 Gen3, LGA1155, Intel Z68, DDR3, PCI-E 3.0, ATX 125,80 €
1TB Barracuda 7200.12, SATA III, 7200rpm, 32MB 159,80 €
Kingston ValueRAM DIMM 4GB PC3-10667U CL9 (DDR3-1333) 23,90 €
Kingston ValueRAM DIMM 4GB PC3-10667U CL9 (DDR3-1333) 23,90 €
Coolermaster HAF 912 Plus 84,90 €
650W 650AX, ATX2.31-virtalähde, 80+ Gold 132,90 €
SH-222AB/BEBE, DVD±RW 22X DL Musta, Bulk 23,00 €
total 1 219,70 €
Core i7 2600K, LGA1155, 3.4 GHz, 8MB 298,00 €
AMD Radeon HD 6950, 2GB DDR5, 2XDVI/HDMI 272,00 €
P8P67, Rev 3.0, LGA1155, Intel P67, DDR3, SATA III, USB 3.0, ATX 124,40 €
1TB Barracuda 7200.12, SATA III, 7200rpm, 32MB 129,00 €
4GB, DDR3 1333MHz, CL9 24,00 €
4GB, DDR3 1333MHz, CL9 24,00 €
CM Gladiator 600 ATX-kotelo, musta 78,00 €
650W Toughpower QFan, Cable Management, ATX-virtalähde 125,00 €
SH-222AB/BEBE, DVD±RW 22X DL Musta, Bulk 23,00 €
total 1 097,40 €, with two GPUs 1 369,40 €
The prices sure have gone up, I thought they'd go down but no
So, which one would you prefer and why? Also, is there anything wrong with those setups? Like overpriced parts, bad selections or other.
If you need I can post the excel sheet I have on the builds, it has ATI and nVidia configurations in 3 different shops.
EDIT: The goal is to run FSX and BF3 maxed out and be future proof. The i7 might sound a bit overkill but I need 8 virtual cores for 3D modeling and rendering.