[FW 190 A8]

Here's the manual:

1. Open the folder 3DO\Plane\Fw-190D-9(Beta)

2. Copy the following files from this folder :

Gloss1D0o.mat
Gloss1D0p.mat
Gloss1D0q.mat
Gloss2D2o.mat
Gloss2D2p.mat
skin1o.tga
skin1p.tga
skin1q.tga
WingLOut_D0.msh
WingROut_D0.msh

3. Paste these files into Your files folder into the following folders:

files\3DO\Plane\Fw-190A-8(Beta)
files\3DO\Plane\Fw-190A-9(Beta)
files\3DO\Plane\Fw-190F-8(Beta)
files\3DO\Plane\Fw-190F-8Mistel(Beta)

If You get the question to overwrite, klick "Yes to all".

4. Make the following entries into Your filelist:

3DO/Plane/Fw-190A-8(Beta)/Gloss1D0o.mat
3DO/Plane/Fw-190A-8(Beta)/Gloss1D0p.mat
3DO/Plane/Fw-190A-8(Beta)/Gloss1D0q.mat
3DO/Plane/Fw-190A-8(Beta)/Gloss2D2o.mat
3DO/Plane/Fw-190A-8(Beta)/Gloss2D2p.mat
3DO/Plane/Fw-190A-8(Beta)/skin1o.tga
3DO/Plane/Fw-190A-8(Beta)/skin1p.tga
3DO/Plane/Fw-190A-8(Beta)/skin1q.tga
3DO/Plane/Fw-190A-8(Beta)/WingLOut_D0.msh
3DO/Plane/Fw-190A-8(Beta)/WingROut_D0.msh

3DO/Plane/Fw-190A-9(Beta)/Gloss1D0o.mat
3DO/Plane/Fw-190A-9(Beta)/Gloss1D0p.mat
3DO/Plane/Fw-190A-9(Beta)/Gloss1D0q.mat
3DO/Plane/Fw-190A-9(Beta)/Gloss2D2o.mat
3DO/Plane/Fw-190A-9(Beta)/Gloss2D2p.mat
3DO/Plane/Fw-190A-9(Beta)/skin1o.tga
3DO/Plane/Fw-190A-9(Beta)/skin1p.tga
3DO/Plane/Fw-190A-9(Beta)/skin1q.tga
3DO/Plane/Fw-190A-9(Beta)/WingLOut_D0.msh
3DO/Plane/Fw-190A-9(Beta)/WingROut_D0.msh

3DO/Plane/Fw-190F-8(Beta)/Gloss1D0o.mat
3DO/Plane/Fw-190F-8(Beta)/Gloss1D0p.mat
3DO/Plane/Fw-190F-8(Beta)/Gloss1D0q.mat
3DO/Plane/Fw-190F-8(Beta)/Gloss2D2o.mat
3DO/Plane/Fw-190F-8(Beta)/Gloss2D2p.mat
3DO/Plane/Fw-190F-8(Beta)/skin1o.tga
3DO/Plane/Fw-190F-8(Beta)/skin1p.tga
3DO/Plane/Fw-190F-8(Beta)/skin1q.tga
3DO/Plane/Fw-190F-8(Beta)/WingLOut_D0.msh
3DO/Plane/Fw-190F-8(Beta)/WingROut_D0.msh

3DO/Plane/Fw-190F-8Mistel(Beta)/Gloss1D0o.mat
3DO/Plane/Fw-190F-8Mistel(Beta)/Gloss1D0p.mat
3DO/Plane/Fw-190F-8Mistel(Beta)/Gloss1D0q.mat
3DO/Plane/Fw-190F-8Mistel(Beta)/Gloss2D2o.mat
3DO/Plane/Fw-190F-8Mistel(Beta)/Gloss2D2p.mat
3DO/Plane/Fw-190F-8Mistel(Beta)/skin1o.tga
3DO/Plane/Fw-190F-8Mistel(Beta)/skin1p.tga
3DO/Plane/Fw-190F-8Mistel(Beta)/skin1q.tga
3DO/Plane/Fw-190F-8Mistel(Beta)/WingLOut_D0.msh
3DO/Plane/Fw-190F-8Mistel(Beta)/WingROut_D0.msh

5. Save the filelist

6. Start the simulation, choose one of these planes, look out of the cockpit and You will see the corrected position of the pilot tube.

That's all.