05.05.2009, 03:13
Recently I found out how to start from a hangar for instance and taxi to the runway.
This is my alternative solution in FMB:
First select a visible runway(in FMB under Stationary Ships and scroll down to the bottom) and place it where you want to start taxiing. Then go to tab WAYPOINT --> SET TARGET and select the visible runway as your target. Replace this runway by the invisible one (nr. 4). Take in account that nr. 4 has another size and the beginning and end are only indicated by little white L-shaped angles. Now try it out if your plane starts exactly where you wanted it. If not move this runway back or forth a bit.
Another thing: when you taxi a little bit too much to the left or right you fall of the invisible runway and Boom! explosion. So cover the area where you want to taxi
This is my alternative solution in FMB:
First select a visible runway(in FMB under Stationary Ships and scroll down to the bottom) and place it where you want to start taxiing. Then go to tab WAYPOINT --> SET TARGET and select the visible runway as your target. Replace this runway by the invisible one (nr. 4). Take in account that nr. 4 has another size and the beginning and end are only indicated by little white L-shaped angles. Now try it out if your plane starts exactly where you wanted it. If not move this runway back or forth a bit.
Another thing: when you taxi a little bit too much to the left or right you fall of the invisible runway and Boom! explosion. So cover the area where you want to taxi