will not retain joystick settings
#1

having a problem with game reverting back to default settings?

Have windows vista 32 ,x52 controller pro rudder pedals.

Have run it in xp mode ,uninstalled the game twice reinstalled but to no luck.

just at a loss have any help would be great THX
Reply
#2

Not particularly familiar with Vista, but make sure you're not installing it into the program files folder because Vista does not allow changes to any config files etc.
If you are putting it into program files make a new folder on the C drive like "Game Files".
S!
Reply
#3

Thx for the reply,but its not saving my joystick setting when i change them in the controls options after i click the apply button.I make the changes and use them in a quick mission leave the game come back,and there set back to the default settings.THX
Reply
#4

I had same issue for awhile. My problem was the switcher, I made my settings for joystick while on 4.09m but when I changed to 4.08 m I would loose my settings they would go to default. So what I did was make my settings in 4.09m then go to 4.08m and set then everything stayed for me. Dont know if this will help you for I do not use vista, so good luck.
Reply
#5

Canis, have you considered manually editing the "default.ini" inside "users"? Might take a few minutes but could be your solution. It appears that, for some reason, your "default.ini" is resetting "settings.ini" each time you start up the sim.

1. Save a copy of your default.ini from "users" in a location of your choice.
2. Save a copy of the settings.ini from "users/doe"
3. Delete the settings.ini from "users/doe". A new copy will be generated when the game is fired up next time.
4. Make a copy of "default.ini" in a work location. Manually edit the assorted commands you wish to change and "save".
5. Place this renamed file into "Users" and let it overwrite , or delete the original from Users first and simply drop the revised file in. Delete/replace might help avoid Vista undoing the changes.
6. It will build a new "settings.ini" in your "doe" folder on the next game startup.

In "Users'. be sure the all.ini format is:
  • doe xxx XXXXXX xxxx (Note:this line is indented 2 spaces in your ini)
    [current]
    0(Note: this zero is indented 2 spaces in your ini)

    x is your first and last name, X is your pilot name. Number of characters will vary to fit.


    This worked for me, but that's no guarantee it will for you. You do have a copy of the original files saved if needed.
Reply
#6

Vista you say? everything is in the "users" sub-folder of your IL2 install.

But to make life the following is the text of the 2 files. Then put these in your "users" folder making default.ini read only.

File #1: Call it all.ini and past in the following.
  • doe John Mad Doe
    [current]
    0

    File #2: call it default.ini and past in the following.

    [HotKey move]
    JoystickDevice0 AXE_U = -power
    JoystickDevice0 AXE_X = aileron
    JoystickDevice0 AXE_Y = elevator
    JoystickDevice0 AXE_RZ = rudder

    [HotKey pilot]
    Z=RudderLeft
    X=RudderRight
    W=Boost
    V=AIRCRAFT_FLAPS_NOTCH_DOWN
    Shift Z=AIRCRAFT_TRIM_R_0
    R=Radiator
    Shift X=AIRCRAFT_TRIM_R_0
    I=AIRCRAFT_TOGGLE_ENGINE
    G=Gear
    Ctrl Z=AIRCRAFT_TRIM_R_MINUS
    F=AIRCRAFT_FLAPS_NOTCH_UP
    Ctrl X=AIRCRAFT_TRIM_R_PLUS
    B=Brake
    N= AIRCRAFT_STABILIZER
    Ctrl T=AIRCRAFT_DROP_TANKS
    Equals=AIRCRAFT_POWER_PLUS_5
    9=Power90
    8=Power80
    7=Power70
    6=Power60
    5=Power50
    4=Power40
    3=Power30
    2=Power20
    1=Power0
    0=Power100
    Slash=AIRCRAFT_RUDDER_CENTRE
    Shift 4=Step90
    Period=AIRCRAFT_RUDDER_RIGHT_1
    Shift 3=Step60
    Shift 2=Step30
    Comma=AIRCRAFT_RUDDER_LEFT_1
    Shift 1=Step0
    Shift 0=StepAuto
    Down=ElevatorDown
    Right=AileronRight
    Up=ElevatorUp
    Left=AileronLeft
    Space=Weapon2
    Shift Up=AIRCRAFT_TRIM_V_0
    Shift Left=AIRCRAFT_TRIM_H_0
    Joystick3 JoystickDevice0=Weapon3
    Joystick2 JoystickDevice0=Weapon2
    Joystick1 JoystickDevice0=Weapon1
    Joystick0 JoystickDevice0=Weapon0
    Ctrl Down=AIRCRAFT_TRIM_V_PLUS
    Ctrl Right=AIRCRAFT_TRIM_H_PLUS
    Ctrl Up=AIRCRAFT_TRIM_V_MINUS
    Ctrl Left=AIRCRAFT_TRIM_H_MINUS
    Underscore=AIRCRAFT_POWER_MINUS_5
    Enter=Weapon0
    Backspace=Weapon1
    NumPad-=AIRCRAFT_POWER_MINUS_5
    NumPad+=AIRCRAFT_POWER_PLUS_5
    Alt Space=Weapon3

    [HotKey gunner]
    MouseLeft=Fire

    [HotKey misc]
    T=toggleSmokes
    A=autopilot
    Ctrl L=cockpitLight
    Ctrl E=ejectPilot
    Ctrl D=cockpitDim
    M = pad
    BackQuote=chat
    S = onlineRating

    [HotKey aircraftView]
    C=changeCockpit
    F1 = CockpitView
    Ctrl F1 = CockpitShow
    Shift F1=cockpitAim
    F2 = OutsideView
    Shift F2 = NextView
    Ctrl F2 = NextViewEnemy
    F3 = OutsideViewFly
    F4 = PadlockView
    Shift F4 = PadlockViewFriend
    F5 = PadlockViewGround
    Shift F5 = PadlockViewFriendGround
    U = PadlockViewNext
    Y = PadlockViewPrev
    NumPad-0 = PadlockViewForward
    F6 = ViewEnemyAir
    Alt F6 = ViewEnemyDirectAir
    Shift F6 = ViewFriendAir
    F7 = ViewEnemyGround
    Alt F7 = ViewEnemyDirectGround
    Shift F7 = ViewFriendGround
    F8 = OutsideViewFollow
    Shift F8 = NextViewFollow
    Ctrl F8 = NextViewEnemyFollow
    Delete = fov30
    End = fov70
    PageDown = fov90

    [HotKey SnapView]
    NumPad-4=Snap_m2_0
    NumPad-3=Snap_3_0
    NumPad-2=Snap_0_m2
    NumPad-1=Snap_m3_0
    Pov225 JoystickPov0=Snap_m3_0
    Pov270 JoystickPov0=Snap_m2_0
    Pov315 JoystickPov0=Snap_m1_0
    Pov0 JoystickPov0=Snap_0_2
    Pov45 JoystickPov0=Snap_1_0
    Pov90 JoystickPov0=Snap_2_0
    F9=SnapPanSwitch
    Pov135 JoystickPov0=Snap_3_0
    NumPad-9=Snap_1_0
    NumPad-8=Snap_0_0
    NumPad-7=Snap_m1_0
    NumPad-6=Snap_2_0
    Pov180 JoystickPov0=Snap_0_m1
    NumPad-5=Snap_0_2
    [HotKey PanView]
    NumPad-4=PanLeft2
    NumPad-3=PanRight3
    NumPad-2=PanDown
    NumPad-1=PanLeft3
    Pov180 JoystickPov0=PanDown
    Pov225 JoystickPov0=PanLeft3
    Pov270 JoystickPov0=PanLeft2
    Pov315 JoystickPov0=PanLeft
    Pov0 JoystickPov0=PanUp
    Pov45 JoystickPov0=PanRight
    Pov90 JoystickPov0=PanRight2
    Pov135 JoystickPov0=PanRight3
    NumPad-9=PanRight
    NumPad-8=PanUp
    NumPad-7=PanLeft
    NumPad-6=PanRight2
    NumPad-5=PanReset

    [HotKey orders]
    Escape = deactivate
    Tab = activate
    0 = order0
    1 = order1
    2 = order2
    3 = order3
    4 = order4
    5 = order5
    6 = order6
    7 = order7
    8 = order8
    9 = order9

    [HotKey timeCompression]
    OpenBracket=timeSpeedDown
    CloseBracket=timeSpeedUp
    Quote=timeSpeedNormal
    P=timeSpeedPause
    Pause=timeSpeedPause

    [difficulty]
    single = 193791
    net = 193791
Reply


Forum Jump:


Users browsing this thread: 6 Guest(s)