[MOD] Atmosperemod (off+online) wind,gust,waketurb etc
#76

I've tried this some more, and I still have the bucking and turning, but I'm not so sure it's the prop wash that's causing it.

When I replace the hashed files of this mod with the regular wind mod, the plane starts rotating on the ground to get aligned with the wind. I then reenabled this mod and tried again. I got the same jumping and bucking, but as I let it go on it aligned itself with the wind and sat steady after around 10 seconds.

It's as if the wind overrides any traction the plane has with the ground, and causes it to swing around becuase of it, even when the tail wheel was locked. I thought wind effects were not supposed to affect the plane until it got to a certain speed, right?

any ideas/help please?

thanks
Reply
#77

HGuderian Wrote:Thanks a lot for clarification.
May be I must run the exe adressing it to a specify folder rather than simply run the exe as it is?


you can put and run weatherset.exe in any folder.

andqui Wrote:I've tried this some more, and I still have the bucking and turning, but I'm not so sure it's the prop wash that's causing it.

When I replace the hashed files of this mod with the regular wind mod, the plane starts rotating on the ground to get aligned with the wind. I then reenabled this mod and tried again.

Hi!
sorry for very late answer=(

what version of atm mod you are using? and what other mod you are ising?
if you have problems with regular windmod or atm modv1 such as a rotating of plane at ground, it is 100% conflicts of mods or problems with file with name

684916A0E86D1CC8

this file include players flight model. check it please have any other mods fith this file Smile


------
i have finished special version for DT. this version has more perfectly quality and have correct forces,smooth gust, simplify AI turb and hasnt prop wash tail. i'll share it tonight.
------
if you have any problems, please try to use version v1 or v4, because this version hasnt prop wash tail and are more stability! i am sorry, but i cant create normal model of prop wash tail=/
Reply
#78

Version 4.0.
In few words- for player wind dont depend of speed or Gears.onGround. Gusts are smooth now.This version i send to DT.
After updates, I think it is a great version of mod.
main theme of this mod is quality and stability work. i remove all elements, which has low quality; or have some suspicion about working.



Version 4.0 include now

wind depend's by altitude by special law a)if alt > 10.0m:
wind velocity determine by this:
V = Vo * (H / Ho)^a
b) if alt


download here:


v4.1- some upgrade of 4.0- added something about prop tail: vibrations around plane in radius 75m, because people ask. this version can give problems analogical v 2.0-3.1.so, if you haven't problems- use v4.0 Smile





Enjoy! Smile
Reply
#79

Fantastic!!! I was just thinking to myself I needed a mod that blew my reticle around even more!!! Smile Big Grin
Reply
#80

Is there any way have a wind bottom? So no wind BELOW a certain altitude. Thus one could model a jet stream.
Reply
#81

Thanks, one of my preferred mods!!
Reply
#82

No prop wash? I was enjoying the challenge and realism it added.
Reply
#83

Many thanks for the update.
Do you might release a version with prop tail wash?
Regards
Reply
#84

Yes, please do! :-)
Reply
#85

boogabooga Wrote:Is there any way have a wind bottom? So no wind BELOW a certain altitude. Thus one could model a jet stream.

hm...it ispossible...but level of weather modulatin is low, so i think it is't needed in this mod....


HGuderian Wrote:Many thanks for the update.
Do you might release a version with prop tail wash?
Regards

burns Wrote:Yes, please do! :-)

Ok, here is it Smile
http://www.filefront.com/14972591/ZloyP ... odv4_1.rar
Reply
#86

ZloyPetrushkO Wrote:
boogabooga Wrote:Is there any way have a wind bottom? So no wind BELOW a certain altitude. Thus one could model a jet stream.

hm...it ispossible...but level of weather modulatin is low, so i think it is't needed in this mod....

what do you mean by modulation?
Reply
#87

boogabooga Wrote:what do you mean by modulation?
hm...
in my post i mean, that current model is simply, so i think that doesn't need to add this setting Smile
Reply
#88

Thank you for your quick update to 4.1 for prop wash. :-)
Reply
#89

Tried the 4.1 mod. We all were affected rather strangely. Seems that when another aircraft approached from the rear both the trailing aircraft AND the lead aircraft felt turbulence. ????
Reply
#90

in 4.1 vibrations must be in radius 75m. so, if you are fly in a front of other plane, and distance
Reply


Forum Jump:


Users browsing this thread: 10 Guest(s)